Home > Products > Roughness Tester > SRT-6210 Ra Rz Rq Rt portable Surface Roughness tester
SRT-6210 Ra Rz Rq Rt portable Surface Roughness tester
- 35 Set / Sets per Month
- Qingdao
- T/T Credit Card
Product Details
Brand Name: | PTE | Place of Origin: | Shandong, China | Model Number: | SRT-6210 |
Power: | Electronic |
Product Description
SRT-6210 Ra Rz Rq Rt portable Surface Roughness tester
Application
This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
Features
* Multiple parameter measurement: Ra, Rz, Rq, Rt
* Highly sophisticated inductance sensor
* Four wave filtering methods: RC, PC-RC, GAUSS and D-P
* Built-in lithium ion rechargeable battery and control circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics, printing,analyzing by the optional cable,the software for RS232C interface.
*Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.
*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
*Metric /Imperial Conversion
Specification
Display 4 digits, 10 mm LCD, with blue backlight
Parameters Ra, Rz, Rq, Rt
Measuring Range
Ra, Rq: 0.005-16.00um/0.020-629.9uinch
Rz,Rt: 0.020-160.0um/0.078-6299uinch
Accuracy: Not more than ±10%
Fluctuation of display value: Not more than 6%
Sensor: Test Principle: Inductance type
Radius of Probe Pin: 5um
Material of Probe Pin: Diamond
Dynamo-measurement of Probe: 4mN (0.4gf)
Probe Angle: 90º
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 5l
Driving speed:
sampling length = 0.25mm Vt=0.135mm/s
sampling length = 0.8mm Vt=0.5mm/s
sampling length = 2.5mm Vt=1mm/s
returning Vt=1mm/s
Profile digital filter
Filtered Profile: RC
Filtered Profile: PC-RC
Filtered Profile: Gauss
Non-Filtered Profile: D-P
Resolution : .001μm if reading less than 10μm
0.01μm if 10μm≤reading less than 100μm
0.1μm if reading ≥100μm
Evaluation length : 5 cut-off
Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~50°C
Humidity less than 80%
Size 140x57x48 mm (5.5x2.2x1.9 inch)
Weight: about 420 g
Packaging Detail:
1. Inner package: dust-proof plastic bag
2. Outer package: standard export wooden case with pallet
3. Special packages: according to buyer's requirements
4. The packages suitable for international transport by sea, by air or any other delivery methods
PTE- A Material Testing Machine Manufacturer
About PTE
JINAN PRECISION TESTING EQUIPMENT CO., LTD is one of the top-ranking manufacturers and suppliers of testing technologies worldwide. With many years experience in this filed, we can supply standard and customized solutions for many test, measurement and quality control tasks required in the world of modern materials testing.
The main products from JINAN PRECISION TESTING EQUIPMENT include hardness testers, universal testing machines, Sample preparation equipment, non-metal materials testing equipment, which can used for testing metals, plastics, rubber, textiles, paper, paint, cement, concrete and packaging materials, etc. Their usage is very wide.
Welcome to enquiry and prompt reply will be done by our professional technical and sales person.
1. Pre-service
--24 Hours online service for your consult.
--Help choose right model,and a series of service,person,advise.
2. Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
--Maintenance plan
more products:
WAW-C Hydraulic unviersal testing machine
Model | WE-100C |
Max. Testing Load (kN) | 100 |
Load range(kN) and Min | 0-20/0.05 |
Max. tensile space | 560 |
Max. Compression space | 530 |
Max. Distance Between Two | 400 |
-------------------------------------------------------------------------------------------------------------------------------------------------------
Compressive strength testing machine for concrete
Model | YES-1000 |
Load display accuracy | ±1% |
Distance between upper | 320mm |
Diameter of lower platen | 300 mm |
Piston stroke | 30mm |
Pump nominated pressure | 40MPa |
-------------------------------------------------------------------------------------------------------------------------------------------------------
Fiber strength testing machine (single column):
Model | WDW-E1,E2, E3, E5, E10, E20, E30, E50, E100 |
Max. Load | 1kN,2kN,3kN,5kN,10kN,20kN |
Deformation accuracy | ≤±0.5% |
Load speed | 0.005-500mm/min |
Total crosshead travel (mm) | 1075 |
Spacing of grip to grip(mm) | 750 |
-------------------------------------------------------------------------------------------------------------------------------------------------------
PLG 300C PC Control High Frequency Fatigue Testing Machine
Model | PLG-10C PLG-20C PLG-50C PLG-100C PLG-200C PLG-300C |
Mean load max(kN) | ±10 .... |
Load step | 1,2,5 |
Accuracy of static load | ≤±1% |
Range of frequency(Hz) | 60~300HZ |
Power | 380V, 3phs, |
-------------------------------------------------------------------------------------------------------------------------
WAW Computer Control Servo Hydraulic Universal Testing Machine
Model | WAW-300E WAW-600E WAW-1000E WAW-2000E |
Max. Testing Load (kN) | 300 .... |
Load Accuracy | ≤±1% from 2% to 100% of full scale |
Strain accuracy | ≤±0.5% |
Load frame Type | 4-column and 2-screw structure |
Max. tensile space (Including piston | 690 |
-------------------------------------------------------------------------------------------------------------------------------------------------------
TORSION TESTING MACHINE
Item | NJS-30 |
Max torque(Nm) | 30 |
Torque resolution (Nm) | 0.01 |
Accurate measuring range of torsion (Nm) | 0.6-30 |
Full-scale reading of torsion angle (º) | 9999.9 |
Torsion angle resolution (º) | 0.01 |
-------------------------------------------------------------------------------------------------------------------------------------------------------
PLS Dyanmic testing machine
Model | PLS-50 |
Static | ±50 |
Dynamic | 50 |
Function generator Range of frequency(Hz) | 0.01~20HZ |
Stroke of piston(mm) | ±75 |
Distance between columns | 500 |
RTH CREEP TESTING MACHINE
Working Temp. range | 400°C~1200°C |
Length of effective soaking zone | 150mm |
Furnace pipe: | φ90mm |
Furnace: | φ300mm |
Furnace life: | ≥3000hours |
Timing error | ±0.2% |
Welcome to visit our factory.
Contact Us
- Jinan Precision Testing Equipment Co., Ltd.
- TM-8810 pressure vessels chemical equipment boilers digital ultrasonic thickness gauge
- DC-3000C Ultrasonic Thickness Gauge
- YUT100 ultrasonic pipe thickness gauge
- Model CM-1210-200N Micro Coating Thickness Meter price
- CM8822 Auto paint Coating thickness gauge
- CM-8000 Wet Film Comb Coating Thickness Gauge
- CM-8000 surface wet film thickness gauge
- CM-8000 Wet Coating Thickness Gauge
- DC-3020C Digital Ultrasonic Thickness Gauge
- CM8828 Digital Car Painting Thickness Tester
- High Accuracy Coating Thickness Meter CM-8828
- CM8828 Digital Handheld Car coating thickness meter
- ABQ snap button Pull Tester
- Ed300 Electronic Paint Coating Thickness Gauge
- MT200 Ultrasonic Thickness Measuring Instrument
- TM-8810 LCD display Ultrasonic Thickness Tester
- DC-2000C Portable Glass Ultrasonic Thickness Measuring Instrument
- Ed300 Digital Display Portable Paint Coating Thickness Tester
- CM8828 Portable Digital Refinishing Gauge
- computer controlled steel strand tensile stress relaxation testing machine
- Computer controlled high accuracy steel strand stress relaxation testing machine
- relaxation tensile testing machine with good price and quality
- WDW-E high configuration Universal Tensile Testing Machine
- AT-180B Portable Belt Tension Meter
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-