Industrial Water Cold Chiller /Water Cooling Water Chiller/ Water Cooler Water Chiller/ Water Cooled Water Chiller

Keywords: 

Water Cold Chiller, Industrial Water Cold Chiller, Industrial Water Chiller, Water Cooling Water Chiller, Industrial Water Cooling Water Chiller, Industrial Water Cooling Chiller, Water Cooler Water Chiller, Water Cooler Chiller, Industrial Water Cooler Water Chiller, Industrial Water Cooler Chiller

Working principle:
The water-cooled chiller uses the shell and tube evaporator to exchange heat between the water and the refrigerant. The refrigerant system absorbs the heat load of the water and cools the water to produce cold water.
Taken to the shell and tube condenser, the refrigerant exchanges heat with the water, so that the water absorbs heat and takes the heat out of the external cooling tower through the water pipe to dissipate (water cooling).

Widely used in Plastic and plastic processing machinery, mold cooling electronics, CNC machine tools, coordinate boring machines, grinders, injection molding, lasers, electroplating, electrophoresis oxidation chillers, hydraulic systems. The cooling of the transmission medium, pharmaceutical, and food preservation, and other industrial production provide frozen water.

Features:
★ Original imported Japanese Daikin or American Copeland compressor.
★ Stainless steel thick thermal insulation water tank.
★ Water tank evaporator, fast heat dissipation, and good heat transfer effect.
★ Water-cooled shell and tube condenser, with fast heat conduction and good heat dissipation effect.
★ The refrigerant is R22, which has a better cooling effect.
★ The compressor and pump are overloads protected.
★ The refrigeration circuit is controlled by high and low voltage switches.
★ A low-pressure pump is standard equipment, and a medium-pressure or high-pressure pump can also be used.
★ Taiwan Bangpu microcomputer controller, temperature control range + 5 ºC ~ + 35 ºC.
★ The controller is easy to operate, timely displays the running status and fault information, and displays the running temperature and set temperature at the same time. GW511A special controller for chiller
★ Built-in compressor overload protector, circulating water pump overload system, drying filter and expansion valve, etc.
★ The water pump device can be equipped with an imported high-efficiency energy-saving water pumps according to customer requirements.

Advantages :
1. Stable performance: Multiple compressors are used in parallel, each compressor comes with an independent refrigeration circuit, that is, the evaporator and condenser are also completely independent; all compressors are commanded by a unified microcomputer control system and turned on and off one by one. It will never interfere with each other. In addition, the brand machines are all made with original authentic products, and the single machine failure rate is extremely low. Based on the above reasons, this series of machines can be guaranteed to have a highly stable performance under long-term continuous operation. The first choice, no need to buy other spare machines.
2. Power saving and energy saving: multiple medium and small power compressors are used in parallel, and the interference to the power grid is very small when turning on and off. As the load changes, the unit automatically determines the number of startups to ensure that the compressors that are turned on are in optimal work State, thereby effectively saving power.
3. Long service life: The design of the evaporator and the condenser is very reasonable, and it is placed above the compressor. During the entire operation process, most of the lubricating oil stays in the compressor to ensure good lubrication of the compressor.