hot sell melt blown non woven fabric/filter meltblown meltblown nonwoven machine

 

Product picture

 

 

 

650-1 Melt blown fabric making machine/production line(One drag three)

Product pictures

 

 

 

Product parameters

I. main technical indexes

1.) fiber thickness: 3-6 μ m (designed and manufactured according to the sample)

2.) effective width of products: l = 600mm (according to customer requirements)

3) the weight range of the product is 10-50g / m2, and the deviation of gram weight is ± 6%

4.) daily output: 500-600kg / 24h

5.) voltage: 380V / 3P / 50 Hz

 

Ⅱ. Including equipm

 

Number	Machine name	quantity
1	65 extruder	1set
2	Melt filter	1set
4	650mm wide melt blown mould	2sets
5	Meltblown receiver	2sets
6	Electret	2sets
7	Slitting winder	2sets
8	electric control system	1set
9	Additional fan	2sets

 

 

 

III. equipment technical reference

1, Screw φ 65 single screw extruder

1. Purpose

This host machine is mainly used to extrude and plasticize the polypropylene fiber chips to reach the material state suitable for melt blowing. The screw form is suitable for PP granule material extrusion MFI:1000-1500

2. Main technical parameters

1) Maximum extrusion yield: 650kg / HR

2) Screw diameter: 65mm, L / D = 30:1

3) Screw speed: 20-80r / min

4) Maximum screw pressure: 25MPa

5) Driving motor power: 15kw

6) Screw heating power: 16kw

7) Screw heating section: Zone 4

8) Equipped with stainless steel hopper, the volume is 50kg

3. Equipment composition and technical description

It is mainly composed of screw (pin mixing head form), screw barrel, electric heater, platinum thermistor, reducer, transmission system, frame, insulation cover, solution temperature detection, discharging machine neck, etc. Equipped with automatic heating and insulation, the main drive adopts frequency converter speed regulation and pressure closed-loop control. The imported temperature control instrument and solid state thermal relay are used for temperature control of each zone. Temperature control accuracy ± 1 ℃. The reducer adopts famous brand hard tooth face wide tooth large torque reducer and forced lubrication system.

The temperature control system of each zone is composed of temperature control instrument and platinum thermistor. The maximum temperature of screw mixing section is 330 ℃, and the screw drive motor is controlled by frequency converter, which is used to accurately control the screw speed.

 

2, 1 set of solution filter

The flange is connected with the extruder. Two groups of filter units can be set to clean and change the screen. The extruded and plasticized melt material is filtered through the filter to completely filter out the magazine and prevent blocking the spinneret hole.

Main technical parameters

Filtration accuracy: 200 μ M

Filter diameter: 80mm

Electric heating power: 2KW

 

3, Spinning box (including 2 metering pumps)

1. Purpose: to keep the material constant temperature in the box, and to quantitatively discharge silk through the metering pump.

2. Parameters: length 966 * width 3290 * height 1800, heating power 40kW, air inlet requirement 0.1MPa,

 

4, 2 sets of melt blown mould 650mm

1. High quality alloy steel heat treatment, surface mirror polishing treatment

2. Mold parameters

1) The extrusion meets the product width of 600mm,

2) Fiber thickness: 3-6 μ m (designed and made according to the sample)

3) Mold heating section 2, each zone 1500W, stainless steel heating rod.

 

5, 2 melt blown receivers

1. Purpose: stack the filamentous fibers ejected from the mold into a net for continuous molding.

 

2. Main technical parameters

1) Plastic belt conveyor molding, width 780mm, length 4550 mm

2) Driving motor power: 1.5kw

3) Conveyor belt air cooling device, power 4kw

 

6, 2 electrets

Purpose: the melt blown cloth has strong electrostatic adsorption capacity by storing charge function dielectric. It can reduce the respiratory resistance of the mask, greatly improve the filtration efficiency, and have a long validity period. So as to ensure that the equipment can produce high efficiency and low resistance filtering materials. Input voltage: 220 V / 50 Hz, input current 3a, output voltage: 50 kV, processing width: 650 mm

 

7, 2 slitting and winding machines

1. Purpose: it is used to cut and roll sheet according to size.

2. Main technical parameters

1) The cutting width can be adjusted according to customer's demand

2) Slitting speed: maximum 10m / min

3) Cutting motor power: 0.75kw

4) Maximum winding diameter: 600mm

5) Friction rubber roller motor power: 1.5kw

6) Blade material: cemented carbide

 

8, 1 control system

Each temperature zone and control instrument of the production line can display and control the operation separately, and display the setting parameters to meet the production needs. The frequency converter adopts square frequency converter.

 

 

 

 

 

 

 

 

Contact information:

 

 

 

Berry Xue ( sales manager )

 

 

 

 

 

M:  +86-18639525015;

 

T: +86-0395-5679933; F: +86-395-6665669

 

Skype: sales10-orange

 

Whatsapp: +86-18639525015

 

E:  sales10@orangecoltd.com

 

W: http://lhorange.en.china.cn

 

 

 

LUOHE ORANGE MECHANICAL EQUIPMENT CO.,LTD 

 

 

 

Office address: F16, Block 19, Fortune Plaza, Songshan Road, Luohe, Henan, China

 

Factory address: No.2, Chezhan Road, Shangqiao, Yancheng District, Luohe, Henan, China