Contact Platform Support
Help CenterASTM DCP Standard Stainless Steel Manual Penetrometer Soil Test
Related Products
-
Hand Operated Rod Extractor of Soil DCPUS$ 100 - 300MOQ: 1 Set -
Motor Operated Liquid Limit DeviceUS$ 600 - 700MOQ: 1 Piece
-
Sand Replacement Complete Set, Sand Replacement Test SetsUS$ 70 - 200MOQ: 1 Piece
-
Soil Test Appatatus Contracting Test ApparatusUS$ 100 - 120MOQ: 1 Set
-
Dual-mass Dynamic Cone Penetrometer( DCP)US$ 900 - 900MOQ: 1 Set
ASTM Standard Stainless Steel Manual penetrometer soil test
This ASTM standard stainless steel manual penetrometer soil test is an instrument designed for the rapid insitu measurement of the structural properties of existing road pavements constructed with unbound materials. Continuous measurements can be made down to a depth of approximately 850 mm or when extension shafts are used to a recommended maximum depth of 2 m. Where pavement layers have different strengths the boundaries can be identified and the thickness of the layers determined. Correlation’s have been established in earlier work (Van Vuuren 1969, Kleyn and Van Heerden 1983, Smith and Pratt 1983) between measurements with the DCP and CBR (California Bearing Ratio) so that results can be interpreted and compared with CBR specifications for pavement design. A typical test takes only a few minutes and therefore the instrument provides a very effi cient method of obtaining information that would normally require the digging of test-pits.
Comprises:
16-T0012/A2 Impact anvil driving rod and clip, falling 575 mm
16-T0012/A3 Steel rod, diameter 16 mm, up to a depth of 800 mm below the surface
16-T0012/A4 N° 3 threaded end cones in tempered steel, 20 mm diameter, 60° cone angle
16-T0012/A5 Bearing plate and measuring rod with adjustable scale (graduated in mm)
16-T0012/A6 Alloy aluminum carrying case
Dimensions: 1080x310x150mm
Weight: 22kgs
Accessories and spare parts: (need to be ordered seperately)
16-T0012/A7 Extension rods: 400 mm, dia. 16mm
Sliding Hammer
Steel made weighing 8kg.
Cone
N° 3 threaded end cones in tempered steel,20 mm diameter, 60° cone angle
Products Name with link
91.8% Response Rate
Products Name with link
91.8% Response Rate
Products Name with link
91.8% Response Rate
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
2017 Latest High Quality Transformer Oil Dielectric Strength BDV TesterUS$ 1500 - 3500MOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
