4-inch agricultural irrigation solenoid valve

Body constructed of durable glassfilled nylon for long life and reliable performance. Stainless steel studs molded into the body resist thread damage.
Slow closing to prevent water hammer and subsequent system damage.
Fabric-reinforced diaphragm for longer life.

Flow: 0,06 to 120.0 m3/h

Pressure: 1.4 to 13.8 bar (23° C)
Temperature: up to 66° C

Electrical specifications 
Solenoid: 24 VAC - 50 Hz
Inrush current: 0.41 A (9.9 VA)
Holding current: 0.23 A (5.5 VA)

Ease of Service

One-piece solenoid with captured plunger and spring for easy servicing.
Prevents loss of parts during field service.
Flow control handle adjusts water flow as needed.
Manual internal bleed with 1/4-turn of the solenoid operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the valve at the controller.
Manual external bleed permits flushing debris from the system.
Recommended for system start up and after repairs.
Solenoid with convenient handle.

Versatility

Globe configuration.
Wide operating pressure range. Low flow operating capability for a wide range of applications.


Accepts zanchen latching solenoids for use with zanchen battery powered controllers.
Important: do not exceed 10 bar operating pressure when using the latching solenoid.