High quality dry heat high temperature sterilizer for towel disinfection nail tools disinfection

 How to use:
1. Put the tool sterilizer in a stable surface.
2. Open the lid, pour quartzite into the pot; quartzite can not be too much(not beyond 80%of the inside capacity).
3. Connect the power,and turn on the switch ,the light turn red and the product begin to heat at the same time.
4. After 12- 18 min heater, insert the tools(scissors, razors, nail cutter, etc) into quartz sand vertically.
5. Wait for 20--30 seconds, put on the adiabatic gloves and take out the sterilized tools.
6. When the inside tank reach the setting temperature, the light will be automatically off and the sterilizer stop heating;
7. And the sterilizer will heat automatically when the temperature is lower than 135 degree, indicator light will turn on again.