Contact Platform Support
Help CenterDrive Shaft Support Bearing 88508
Related Products
-
Miniature Ball Bearing 6700ZZ Deep Groove Ball Bearing 6700 ZZ 10x15x4mmUS$ 0.15 - 0.18MOQ: 10 Pieces -
Large Diameter Deep Groove Thin Section Ball Bearing 61824 2rs 120*150*16mmUS$ 4.55 - 4.79MOQ: 10 Pieces
-
High Quality Deep Groove Ball Bearing 16056 16056ZZ C4 Bearing Size 280*420*46mmUS$ 7.99 - 15MOQ: 10 Pieces
-
626 Deep Groove Ball Bearing 626Z 626RS 626ZZ Made in China Ball Bearing Door HingeUS$ 0.13 - 0.18MOQ: 1 Piece
-
Ball Bearing 6303ZZ 6303Z Deep Groove Ball Bearing 6303 Z ZZ ABEC-1 Made in ChinaUS$ 0.46 - 0.55MOQ: 100 Pieces
Drive Shaft Support Bearing 88508
1. Abstracts:
Deep groove ball bearings are the most representative and widely used bearing. It can accommodate axial loads in both directions, in addition to radial loads, even at high speeds. They are available for low noise and low vibration. Bearings with mental shields and rubber seals are pre-lubricated by some grease. Bearing with snap ring and flange on the outer ring. Deep groove ball bearings with filling slots have the same dimensions with standard ones. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots.
2. Specifications of Drive Shaft Support Bearing 88508
- The bore and outside diameter are nominal metric dimensions.
- Also available with a snap ring groove on the OD, with/without the ring.
| Attributes | Values |
| Bearing Type | two felt seals |
| Bore Dia (d) | 1.5748 |
| Outer Dia (D) | 3.1496 |
| Outer Width (Bo) | 0.8270 |
| Inner Width (Bi) | 1.0630 |
| Radius (min) (rs) | 0.040 |
| Dynamic Load Rating (Cr) | 5036 |
| Static Load Rating (Cor) | 3521 |
| Ball Qty | 9 |
| Ball Dia (Dw) | 0.4687 |
| Weight (g) | 462.00 |
| Precision | ABEC 1 |
| Standard Clearance | C0 |
| Material | 52100 Chrome steel or equivalent |
3. Features of Drive Shaft Support Bearing 88508
(1)The single row deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
(2) Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
(3) Deep-groove bearings have higher load ratings for their size than shallow-groove, but are also less tolerant of misalignment of the inner and outer races.
(4) A misaligned shallow-groove bearing may support a larger load than the same sized deep-groove bearing with similar misalignment.
(5) This kind of bearing is also availed both in open design and sealed design.
(6) The seals way of the bearing:
RS: contact seal on one side of the bearing
2RS: contact seals on both sides of the bearing
Z: shield on one side of the bearing
ZZ (2Z): shields on both sides of the bearing.
(7) Bearing with RS seals has better sealing but lower limited speed compared with the bearing with Z seals.
4. Model numbers
ring |
d |
D |
T |
Chamfer |
Basic load rating (KN) |
balls specifications |
limit speed | mass(kg) | ||||||
Dyna - mic Cr |
Static Cor |
No. |
Size mm |
Grease r/min |
Oil r/min |
KG(pcs) |
||||||||
88505 |
25 |
0.9843 |
52 |
2.0472 |
15 |
16.8 |
1.0 |
14.0 |
7.85 |
9 |
7.938 |
13000 |
15000 |
0.147 |
88506 |
30 |
1.1811 |
62 |
2.4409 |
16 |
24 |
1.0 |
19.5 |
11.3 |
9 |
9.525 |
11000 |
13000 |
0.235 |
88507 |
35 |
1.3780 |
72 |
2.8346 |
17 |
25 |
1.1 |
25.7 |
15.3 |
9 |
11.112 |
9800 |
11000 |
0.33 |
88508 |
40 |
1.5748 |
80 |
3.1496 |
21 |
27 |
1.1 |
29.1 |
17.8 |
9 |
12.0 |
8700 |
10000 |
0.448 |
88509 |
45 |
1.7716 |
85 |
3.3465 |
21 |
27 |
1.1 |
32.5 |
20.4 |
10 |
12.0 |
7800 |
9200 |
0.498 |
88510 |
50 |
1.9685 |
90 |
3.5433 |
22 |
30 |
1.1 |
35.0 |
23.2 |
10 |
12.7 |
7100 |
8300 |
0.554 |
88511 |
55 |
2.1654 |
100 |
3.9370 |
22 |
31 |
1.5 |
43.5 |
29.2 |
10 |
14.288 |
6400 |
7600 |
0.76 |
88512 |
60 |
2.3620 |
110 |
4.3307 |
23 |
36 |
1.5 |
52.5 |
36.0 |
10 |
15.081 |
6000 |
7000 |
0.963 |
63001 |
12 |
0.4724 |
28 |
1.1024 |
12 |
/ |
0.3 |
2.1 |
2.39 |
8 |
4.763 |
26000 |
30000 |
0.031 |
63002 |
15 |
0.5906 |
32 |
1.2598 |
13 |
/ |
0.3 |
5.6 |
2.84 |
9 |
4.763 |
22000 |
26000 |
0.043 |
63003 |
17 |
0.6693 |
35 |
1.3780 |
14 |
/ |
0.3 |
6.8 |
3.35 |
10 |
4.763 |
20000 |
24000 |
0.056 |
63004 |
20 |
0.7874 |
42 |
1.6535 |
16 |
/ |
0.6 |
9.4 |
5.05 |
9 |
6.35 |
18000 |
21000 |
0.098 |
63005 |
25 |
0.9843 |
47 |
1.8504 |
16 |
/ |
0.6 |
10.1 |
5.85 |
10 |
6.35 |
15000 |
18000 |
0.114 |
63006 |
30 |
1.1811 |
55 |
2.1645 |
19 |
/ |
1.0 |
13.2 |
8.3 |
11 |
7.144 |
13000 |
15000 |
0.162 |
63007 |
35 |
1.3780 |
62 |
2.4409 |
20 |
/ |
1.0 |
16.0 |
10.3 |
11 |
7.938 |
12000 |
14000 |
0.214 |
63008 |
40 |
1.5748 |
68 |
2.6772 |
21 |
/ |
1.0 |
16.8 |
11.5 |
12 |
7.938 |
10000 |
12000 |
0.265 |
Send Inquiry to This Supplier
You May Also Like
-
6018 2RS 6018 2RS1/C3 Wheel Hub Bearing for Auto Part/Machinery/Volkswagen/Audi/Hyundai/Ford/Nissan/Jeep/Honda/MazdaNegotiableMOQ: 500 Pieces
-
A4VG Hydraulic Pump Shaft Bearing for Repair A4VG56 Rexroth Pump Piston Pump Big Bearing Deep Groove Clutch Release BearingUS$ 45.59MOQ: 2 Pieces
-
6202 Manufacturer Wholesale Single Row Deep Groove Ball Bearing 15x35x11mmNegotiableMOQ: 1
-
Deep Groove Ball HRB BearingUS$ 0.1 - 10MOQ: 1 Piece
-
ACB336 Angular Contact Headset Bearing 1-1/8" 30.15x41x6.5mm 36/45 DegreeUS$ 1.5 - 1.5MOQ: 100 Pieces
-
Barnroom Sliding Shower Door Roller u Groove WheelUS$ 0.1 - 100MOQ: 50 Pieces
-
CR High Performance Deep Groove Ball Bearings 6804JVB/60 62 63 64 68 69SeriesUS$ 0.2 - 5MOQ: 300 Pieces
-
Crazy Hand Spinner Toys W01A282US$ 0.5 - 2MOQ: 100 Sets
-
High Quality and Competitive Price Ndc Engine BearingUS$ 0.1 - 100MOQ: 1000 Pieces
-
Water Pump BearingUS$ 10 - 50MOQ: 200 Sets
