Industrial water filter cartridges HF40PP005D01 high flow filter element

Industrial water filter cartridges HF40PP005D01 high flow filter element 

Product description

 

 

Description of high flow water filter

Melt blown polypropylene microfber flter media provides high particle removal effciency for high quality fltration with broad chemical compatibility

 

Advantage&Features 

High loading capacity for long life and lower cost fltration.
Fewer cartridges for fewer change-outs and lower labor cost.
Fewer seals, reduced risk of by pass resulting in high quality
fltration.
Extremely low disposal costs, less than a tenth of some cartridges

Details

 

 

 

 

 

 

 

 

 

 

Specifications of water filter cartridge

Filter Media	Melt blown polypropylene microfber
Filter Grades	(90%) 0.5, 1, 5 and 10 µm
Center Core(40’length only)	Polypropylene,Cellulose
End caps	Glass Filled Polypropylene
Support	Polypropylene
O-ring Options	Buna-n, ePr, Silicone, Fluoroelastomer
Cartridge Length	39”, 60”
Cartridge max OD	6.5”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other type replace high flow filter cartridge 

 

Micron	1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm
Cartridge Length:	20" (508mm) /40" (1016mm)/60" (1524mm)
Cartridge Max.OD:	6.5"(165mm)/6"(152mm)
Filter Medium:	Polypropylene ,  Cellulose , Melt Blown PP
Support:	Polypropylene
End Caps:	Glass Fiber Reinforced Polypropylene
O-ring Seal options:	EPDM,NBR,Viton
Polypropylene:	3.44bar@82°C,50psi@180°F
Glass Fiber:	3.44bar@121°C,50psi@180°F
Suggestion Flow:	20" 660LPM
	40" 1300LPM
	60" 1900LPM

 

 

Parker

 

Micron	1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm
Cartridge Length:	40" (1016mm)
Cartridge Max.OD:	6.0"(152mm)
Filter Medium:	Polypropylene , Cellulose , Melt Blown PP
Support:	Polypropylene
End Caps:	Glass Fiber Reinforced Polypropylene
O-ring Seal options:	EPDM,NBR,Viton,
Polypropylene:	3.44bar@82°C,50psi@180°F
Glass Fiber:	3.44bar@121°C,50psi@180°F
Suggestion Flow:	40" 1300LPM

 

 

PAL

 

OD	6” (152mm)
Length	20"/40"/60"
Micron	0.1um~100 um
Maximum operating temperature	Pleated/melt-blown pp: 82℃
	Pleated glass fiber: 121℃
Maximum operating differential pressure	Pleated/melt-blown pp: 3.44bar@82℃
	Pleated glass fiber: 3.44bar@121℃
Suggestion design flow	40": ≤15m3/h
	60": ≤25m3/h

 

 

 

 

Packaging&Delivery

 

 

 

About Our Company

 

 

 

 

 

 

Certifications