Vp37 Fuel Injection Pump Tester for Sale

VP37 Eletronic Contorller Oil pump
Calibrating data
1.Cavity pressure:
Speed RPM Voltage MV Internal Pressure BAR MINMUM MAX.
500 2510.0 8.00 7.30 8.70
2100 3330.0 10.70 10.00 11.40
300 2510.0 7.50 6.30 8.70
2.Pistons trip timing
Speed RPM Voltage MV travel MM MIN. MAX
300 2510.00 8.50 6.00 11.00
2100 3330.00 12.30 11.60 13.00
3. Delivery Oil quantity(500 times)
Speed RPM Voltage MV return oil Temp. Oil Quantity ML Min. Max.
100 2820.00 60 9.8 8.4 11.2(200 )
400 2000.00 60 6.0 4.2 6.8
800 2650.00 60 18.2 18.1 18.3
500 2510.00 60 19.2 18.4 19.9
1100 2420.00 60 13.6 13.0 14.3
2100 3330.00 60 18.9 18.1 19.6
When test the speed range from 100 -400rpm, open the advance angel (timing)
electromagnetic vlave switch button of the tester . when the speed is 100rpm, the oil
quantity count 200 times.
4.Static parameters

VP37 tester
Temp.22.5 Minmum Max.
Between 5 and 6 Resistance 0.7Ω 0.4Ω 1.0Ω
Between 4 and 7 Resistance 2.6Ω 1.2Ω 4.0Ω
Between 1 and 2 Resistance 7.0Ω 6.2Ω 7.8Ω
Between 3 and 2 Resistance 7.0Ω 6.2Ω 7.8Ω
5. Return Oil quantity
Speed 500 Throttle2500 Return oil Temp.60 return oil quantity 50L/H Min30L/H max. 70L/H
Speed 210 Throttle3330 Return oil Temp 60 return oil quantity 60L/H min.40L/H Max.80L/H
L/H is Liter per Hour.
Note: All the data is calibrated Based on the pump JB -01,the data will be some
differences based on different testing equipment and testing way. Please calibarte the
data with the standard pumps.OPERATING INSTRUCTION

 Technical Data
1. Eletronic Power: 220V 50HZ
2. Output Power: <500 W
3. Data display: Light Four digital Nixietube
4. Control Range: 0-5000rmv
5. Advance angel valve control singal: DC12V 1.5A
6. Block oil valve control singal: DC12V 1.5A
7. Average good runing time: 15000 Hours
 Button Instructions:
There are total eight buttons, four of them are functions buttons:
(Switch, Export, Angel, and Oil Pump, other four buttons are Meau
( Menu, Enter, ↑and↓)
1. “ switch ” is the key to switch display button. Normally, it show the
actual tooth bar Value, singal lamp power off. Press it, singal lamp
light, it show the Pre-set tooth bar value.
2. “ export” button is the key of controll the output. It can control
voltage while VP37 pump rotating the eletromagnetic iron. Light
effective.
3. “ angel” is switch of the advance angel eletromagnetic vlave.
4. “oil pump” is the switch of the block oil eletromagnetic vlave.
5. “menu” can enter or exit the menu setting.
6. “ enter” button is key to confirm, to confirm the parameters are
effective input.
7. “↑”and“↓” is the increase and reduce buttons. It used for changed
the Numerical value .3. Usage Instructions:
Under the normal situation ( the tester show both the actual tooth bar
value and pre-set tooth bar value) Press “↑”or “ ↓” to change the tooth
bar value. After changed the value which is you need, then press
“ export” button, tooth bar can reach the pre -se value.
Press “ Angel” button to open and close the advance angel
eletromagnetic valve. Press “ Oil pump” button to open or close block oil
eletromagnetic valve..

VP37 EDC TESTER