Contact Platform Support
Help CenterAcrel 300286 ARTU-K32 Remote Control Unit Wireless Measure Equipment
Related Products
-
Acrel 300286.SZ ARTU-KJ8 Multi-circuit 8 Channel D/I 8 Channel Relay Output Remote Terminal UnitUS$ 130 - 130MOQ: 1 Piece -
Acrel 300286.SZ ARTU-KJ8 Din Rail Multi-circuit 8 Channel Digital 8 Channel Relay Output RTU/remote Terminal UnitUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ Remote Terminal Unit 8 Channel Digital Active Contact Input 8 Channel Relay Output ARTU-KJ8US$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 Multi-circuit Remote Terminal Unit for Data Center SolutionUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 DIN Rail Multi-circuit Remote Control Signal Collect DeviceUS$ 130 - 130MOQ: 1 Piece
Product Description
ARTU-K32 Series Remote Terminal Unit
General
ARTU distributed monitoring and control devices is a high-performance components used in intelligent power distribution, industrial automation, and other fields.Products include: remote control unit, remote signaling unit.It has a channel status light and a communication status light.It has two-way communication interface,one is used to set the general parameters
and commissioning,another is used to read and set the "four remote" value.Product’s address and baud rate can be set by PC and local DIP switch.Products using the software and hardware "watchdog" technology to prevent freezing.
The user's Guide applies to ARTU distributed monitoring and control devices
Features
● RS485 (MODBUS -RTU)
● channel state indicator and communication state indicator
● 24VDC, range DC18~36V; 220VAC/DC, range AC85~265V, DC100~350V.
Technical Parameters
Technical parameters | Values |
Number of inputs | 8/16/32 |
Input | Active wet contact（DC12V）or passive dry contact input |
Communications | RS485 port（Modbus RTU protocol），two-core shielded line |
Bus capacity | ≤32 |
Switch incident resolution | Ability to distinguish between multiple contact successive changes:When any two contacts displacement interval is greater than 1 |
Signalling scanning speed | All channel scanning cycle time required is 1ms |
Remote signaling debounce time | All channels use the same debounce time: 1ms (can be set) |
number of sequence of events(SOE) | 1600 Groups |
Function
Wiring
Typical Conneciton
Send Inquiry to This Supplier
You May Also Like
-
Acrel 300286.SZ ARTU-KJ8 Multi-circuit Remote Terminal Unit/RTU With Rs485 ModbusUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 RTU for SCADA System Multi-circuit Remote Terminal Unit With Recording FunctionUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ Multi-circuit IOT Used Remote Terminal Unit ARTU-KJ8 With Modbus RtuUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 Remote Terminal Unit/RTU With Rs485 Modbus for Power Distribution SystemUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 RTU Rs485 Modbus Multi-circuit Remote Terminal Unit Collect 8DI 8 Relay Out SignalUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 DIN Rail Multi-circuit Remote Control Signal Collect Device RTU for Industrial AutomationUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 DIN Rail Multi-circuit Remote Terminal Unit/rtu for Intelligent Power DistributionUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 Multi-circuit Din Rail Remote Terminal Unit/RTU With Remote Control Remote SignalUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ Multi-circuit Remote Terminal Unit/RTU ARTU-KJ8 With Passive Contact Digital Input Relay OutputUS$ 130 - 130MOQ: 1 Piece
-
Acrel 300286.SZ ARTU-KJ8 Multi-circuit 8 Channel D/I 8 Channel Relay Output Remote Terminal UnitUS$ 130 - 130MOQ: 1 Piece
