4p 0.75KW squirrel cage three phase induction motor

4p 0.75KW squirrel cage three phase induction motor

Ac motor,Asychronous motor,Electric motor,Induction Motor.

3) Rated voltage: 380/660v
4) Frequency: 50Hz, 60Hz
5) Protection class: IP54
6) Insulation class: B,or F
7) Materials: cast iron(63-355), aluminum (FRAME 63-160)
8) EFF: EFF3, EFF2, EFF1
9) Poles: 2, 4, 6, 8,
10) Cooling method: IC411 (total-enclosed fan-cooled type)
11) Mounting types: IMB3, IMB5,IMB35
12) Operating mode: S1
13) Connection: "Y" type for 3kW and downwards, "D" type for 4kW and upwards
14) Ambient temperature: -15oC and 40oC
15) The altitude should be lower than 1,000m above the sea level
16) Relative humidity: not higher than 90%
17) Special motors can be designed according to customers' requirements
Inner packing:
1) Frame 63-112: foam boxes
2) Frame 132-315: wooden boxes
Mounting ways:IMB3(foot mounting),IMB5(flange mounting),IMB35,IMB14.

BENIFITS TO CLIENT:

Reliable operation
High efficiency
Low noise
Long life
Power saving
Slight vibration
Try our best to meet customers' requirements, including voltage and frequency etc.
It is newly designed in conformity with the relevant rules of IEC standards
Special rotor balance for reduced vibration
Warranty: 12 months from date of delivery.

OPERATION CONDITIONS:

Duty:    S1

Frequency:    50/60HZ

Rated voltage:    380V±5%

Protection class:     IP44/IP54

Cooling method:      IC0141

Ambient temperature:    -15°C≤0≤45°C

Altitude should be lower than 1000 meters above sea level

 china julante motors factory advantages:

 Prompt Quotation.

  Competitive Price 

 Guaranteed Quality

 Timely Delivery.

 100% Tested.

 Sincere and Professional Service.

 Outstanding Finishing Surface.

 Strictly and Perfect Management is guaranteed for Production. 

 Specialized in Manufacturing and Supplying a wide range of Electric Motors since year 2002. 

 Have Rich Experience and Strong ability to Develop New Products.

Have Ability to Design the Products Based on Your Original Samples

 Manufacturer process:

Stamping of lamination

Rotor die-casting

Winding and inserting – both manual and semi-automatically

Vacuum varnishing

Machining shaft, housing, end shields, etc…

Rotor balancing

Painting – both wet paint and powder coating

Motor assembly

Packing

Inspecting spare parts every processing

100% test after each process and final test before packing

Feel free to contact us if you are interested in our electric motors.

Contact information