Contact Platform Support
Help CenterBag Filter Dust Collector for Induction Furnace
Related Products
-
Industrial Cartridge Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set -
Plasma Cutting Cartridge Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
-
Foundry Plant Bag Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
-
Cartridge Dust Collector For Abrasive Blasting ChamberUS$ 2000 - 20000MOQ: 1 Set
-
Mobile Welding Fume Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
Description:
Pulse dust catcher on the basis of the bag filter to improve the new type of efficient pulse dust collector, a combination of chamber blow, the advantages of different pulse injection filter overcomes the chamber soot cleaning strength is not enough, in and out of the wind unequal distribution of faults, to expand the application range.
Pulse dust collector is when dusty gas from the air inlet to filter, first met in the middle of the outlet inclined plate and baffle, air turned into the ash bucket, slowing down of air flow at the same time, due to inertia effect, coarse particles of dust in the gas directly into the hopper.Dust in advance of the role, the airflow into the ash hopper then fold and upward through internal filter bag dust containing metal skeleton was set on the outer surface of the filter bag, after purification, the upper gas into the filter bag chamber clean room, packed into the outlet discharge, through the filter bag dust gas purification process, with the increase of time and accumulate more and more attached to the filter bag dust, increase the resistance of filter pocket, the parameters of gradually reduce, to work, to control the resistance within a certain range (140-170 mm water column), once more than must be carried out on the filter bag dust, soot triggered by pulse controller order of each control valve open pulse valve, air bags of compressed air by spray torch each hole scripture's tube into the corresponding filter bag, filter bag instant swelling, make the product attached to the surface of the filter bag dust fall off, filter bag to restore the initial state.Clear the dust into the hopper, the ash discharge system out of the body. Thus makes the product attached to the filter bag dust pulse blowing soot cleaning cycle, purified gas through normally, guarantee the dust removal system is running. Clear the dust into the hopper, the ash discharge system out of the body. Thus makes the product attached to the filter bag dust pulse blowing soot cleaning cycle, purified gas through normally, guarantee the dust removal system is running.
technical parameter:
| Model | filting area(m2) | air volume(m3/h) | filting airspeed(m/min) | working resistance(Pa) | dust removing pressure(Mpa) |
| DMC-32 | 30 | 2880-4800 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-48 | 48 | 4320-7200 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-60 | 60 | 5400-9000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-72 | 72 | 6480-10800 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-90 | 90 | 8100-13500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-120 | 120 | 10800-18000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-150 | 150 | 13000-22500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-180 | 180 | 16200-27000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
DMC-210 |
210 | 18900-31500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-250 | 250 | 22500-37500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-270 | 270 | 24300-40500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-300 | 300 | 27000-45000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-340 | 340 | 30400-51000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-420 | 420 | 37800-63000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-500 | 500 | 45000-75000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-600 | 600 | 54000-90000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-740 | 740 | 66600-111000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-870 | 870 | 78300-130500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-1000 | 1000 | 90000-150000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-1100 | 1100 | 99000-165000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
If any requirement please feel free to contact us cassie(@)
Send Inquiry to This Supplier
You May Also Like
-
Welding Fume Cartridge Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
-
Double Suction Arm Welding Fume Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
-
Polyester Media Horizontal Cartridge Dust Collector for Laser CuttingUS$ 2000 - 20000MOQ: 1 Set
-
Horizontal Cartridge Dust Collector for CNC MachiningUS$ 2000 - 20000MOQ: 1 Set
-
Cartridge Filter Dust Collector for Welding FumeUS$ 2000 - 20000MOQ: 1 Set
-
Industrial Bag Filter Dust Collector for Coal IndustrialUS$ 2000 - 20000MOQ: 1 Set
-
Cartridge Filter Dust Collector for Shot Blasting MachineUS$ 2000 - 20000MOQ: 1 Set
-
High Temperature Resistance Bag Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
-
Industrial Cartridge Filter Dust Collector for Food FactoryUS$ 2000 - 20000MOQ: 1 Set
-
Powder Coating Cartridge Filter Dust CollectorUS$ 2000 - 20000MOQ: 1 Set
