Indesit Dryer Belt

Description 

Indesit dryer belt 

The materials are evenly spread on the mesh belt by the feeder. The mesh belt is generally made of stainless steel screen of 12-60 meshes and moves in the dryer after driven by the transmission device. The dryer is composed of several units. The hot air in each unit circulates separately. Some tail gases are discharged by the special dehumidifying fan, and waste gases are controlled by the control valve. The hot air goes through the mesh belt spread with materials from the bottom to the top or from the top to the bottom to complete the process of heat and mass transfer and bring away moisture of materials. The mesh belt will move slowly. Its running speed can be freely adjusted according to material temperature. The finished products after drying will drop into the material collector continuously. The upper and lower circulation units can be set flexibly according to user needs. The unit quantity can be decided according to the needs.

Application

The belt dryer is an ordinary continuous drying equipment. It is widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry, electronic industry and so on. Especially it is suitable for drying raw materials that are good in breathability and have the shape of pieces or strip of granule. It is also possible to dry the pasted raw materials such as filter cake after shaped through granulator or extruder.