Contact Platform Support
Help Center
Home > Electrical & Electronics > Power Transmission & Transformer > Transformer > Acrel Hall Effect Sensor dc 0A-1000A With 4-20mA Output Open Loop Dismountable Hall Effect Current Sensor With CE
Acrel Hall Effect Sensor dc 0A-1000A With 4-20mA Output Open Loop Dismountable Hall Effect Current Sensor With CE
Negotiable
MOQ: 1 Piece (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Main Markets:
Southeast Asia
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
Delivery time depends on order quantity.
Related Products
-
AC DC Split Core Current Transducer With Power Supply 15VNegotiableMOQ: 1 Piece -
Open-loop Max dc Input 1500A Split Core Hall Effect Current Sensor / Transducer With 4 to 20mA OutputNegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 100/5ANegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 90/5ANegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 80/5ANegotiableMOQ: 1 Piece
Attention: 1. When the hall sensor is used, in order to obtain better dynamic characteristics and sensitivity, attention must be paid to the coupling between the primary side coil and the secondary side coil. It is recommended to use a single wire and the wire completely fills the hall sensor module wire hole;
2. When the hall sensor is used, the best measurement accuracy can be obtained under the rated input current value. When the measured current is far lower than the rated current To obtain the best accuracy, multiple turns can be used for the primary side, i.e. IPNP = rated ampere turns. In addition, the temperature of the primary side feeder shall not exceed 80 ℃;
3. The auxiliary power supply of Hall current sensor shall not exceed ± 20% of the calibrated value when it works normally; 4. Hall current sensor shall not fall from a high place (≥ 1m) during installation and use; 5. It is unable to adjust the zero point and full degree adjustment potentiometer; 6. Auxiliary power supply needs to be configured by itself; 7. The positive and negative poles of the power supply cannot be reversed.
Send Inquiry to This Supplier
* Email
Want the best price?
Post an RFQ now!
Main Markets
Southeast Asia
You May Also Like
-
Acrel Current Transformer AKH-0.66/I 30I 75/5ANegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 60/5ANegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 25/5ANegotiableMOQ: 1 Piece
-
Acrel AKH-0.66/I Series Current Transformer AKH-0.66/I 30I 15/5NegotiableMOQ: 1 Piece
-
AKH-0.66/I Series Current Transformer AKH-0.66/I 30I 150A/5A ACREL Factory Direct.SZNegotiableMOQ: 1 Piece
-
Acrel AKH-0.66 30I Current Transformer Low Voltage Measuring Device Current Ratio 100/5A Class 0.5NegotiableMOQ: 1 Piece
-
Acrel Current Transformer AKH-0.66/I 30I 20/5ANegotiableMOQ: 1 Piece
-
Acrel AKH-0.66/L-45 Clamp Leakage for Network Monitoring Weak Current EquipmentNegotiableMOQ: 1 Piece
-
Acrel AKH-0.66/L-45 Residual Release for Monitor the Voltage and Current of 108 Batteries SensorNegotiableMOQ: 1 Piece
-
Acrel AKH-0.66/L-45 Auto Reclosing Residual Sensor for Voltage Current Meter Power MonitorNegotiableMOQ: 1 Piece
