Contact Platform Support
Help Center5 Point 1-3/4" Carbide Flail Cutters Drum Shafts Washers for Bartell Sp8 Scarifier/ Concrete Planer
Related Products
-
Accessories on Surface Prep Concrete Scarifiers Blastrac BMP-265, Edco Cpm-8, Airtec Roto-Tiger 2500US$ 0.9 - 1.3MOQ: 100 Pieces -
Parts & Accessories 6PT Carbide Cutters on Edco Cpm-8 Milling Multi-Plane MachinesUS$ 0.9 - 1.3MOQ: 100 Pieces
-
Parts & Accessories 6PT Carbide Cutters on Edco Cpm-8 Milling Multi-Plane MachinesUS$ 0.9 - 1.3MOQ: 100 Pieces
-
Scarifying Machines Accessories Carbide Lamellen Cutters Fit Airtec Roto-Tiger 2500 RM320 HMT 5.40 Drum Assembly, and Teeth Pointed Steel CuttersUS$ 0.9 - 1.3MOQ: 100 Pieces
-
16PT Spike Pin Edges Concrete Tct Tungsten Carbide Scarifier Large Flat Milling Scarifier CuttersUS$ 1 - 2.5MOQ: 100 Pieces
Welcome to our products!
We offer durable accessories and spare parts for concrete scarifiers, concrete scarifying machines,concrete planers machines, concrete milling machines, floor grinders, floor scabblers, ranging from replacement TCT tungsten carbide cutters/flails,milling cutters,scabbler bits, full steel star and beam cutters and other ODM accessories. They are perfectly compatible with brands EDCO Multi-plane,Bartell BEF planers, Blastrac scarifiers,SASE,HTC,Trelawny TFP planers, Airtec scarifiers,Kindex,Scanmaskin and other scarifiers and floor planers.
If you can provide below information, we can assist quickly for the right accessries:
-the brand and model of your concrete scarifiers/ floor planers equipment
-the drum shaft diameter
-the cutter outer diameter/ inner hole diameter
Below are the standard sheet to help you to choose the correct tools for your scarifiers floor planers:
| Scarifier type | standard accessories | qty each set | Compatible scarifiers |
| 6" scarifiers 150mm planers |
5pt TCT carbide flails 5 teeth milling cutters |
76pcs/set about 100pcs/set |
Von Arx® - FR200
Von Arx® - VA25 - 12mm
Airtec® - RT - 2000
SASE® - SC10E - 12mm
MK® - SGII / SG5 / SG9
Sase® - SC8E
Bartell® - SP8
Bartell®BEF 200
General Equipment® - SP8
Kut-Rite® - KR8
Blastrac BMP-215 SCARIFIER
Trelawny TFP 200 RANGE
|
| 8" scarifiers 200mm planers |
5pt TCT carbide flails 6pt TCT carbide flails 5 teeth milling cutters |
76pcs/set about 100pcs/set |
|
| 10" scarifiers 250mm planers |
6pt TCT carbide flails 8pt TCT carbide flails 5 teeth milling cutters |
105pcs/set 108pcs/set 120pcs/set |
Kut-Rite® - KR10
Sase® - SC10E - 9/16"
Edco® - CPM-10 - 5/8"
EGM 25-10
Husqvarna® - CG 200 S - 1/2"
Blastrac - BMP-265 SCARIFIER
Trelawny-FLOOR SCARIFIER TFP 260
Airtec - RT - 2500
Airtec - RT - 2500 Duo Airtec - RT 3200 Airtec - RM 320 |
| 12" scarifiers 300mm planers |
6pt TCT carbide flails 8pt TCT carbide flails 6 teeth milling cutters |
108pcs/set 120pcs/set 160pcs/set |
|
| 14" scarifiers 350mm planers |
8pt TCT carbide flails 12pt TCT carbide flails 6 teeth milling cutters |
100~230pcs/set |
Edco® - CPU-12
Sase® - SC12E
Von Arx® - VA30
Trelawny-SCARIFIER TFP 320
Edco® - CPU-10FC
Airtec® - RT 3200
Airtec® - RM 320
Blastrac - BMP-335 SCARIFIER
|
Product Description:
Assembly Milling of misangled footpath, scrabbling of concrete surfaces and milling concrete joints.The carbide cutters are standard tools for concrete scarifiers and milling machines. It is with premium carbide tips which ensures a long lasting working life, and aggressive working effect. The standard dimension suits for most brand surface floor planers, such as TFP 260, Airtec RT-2000, Von Arx FR200, Blastrac BMP-265 scarifiers and etc.and they can work excellently to remove traffic lines, pavement markings, epoxy, paint, and waterproofing membranes. We use premium quality tungsten carbide for our flail cutters so as to last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. We keep a full range of stock for TCT cutters, beam flails ,milling cutters,scabbler bits and other spares for your cutter drums and flail shafts to fit your equipments.
Standard milling drum equipped with carbide cutters with soldered carbide tips for removing concrete and screed, tile adhesive and sealants. Also for cleaning incrusted surfaces.
Trimmer SCARIFYING MACHINE TR300 Complete with drum equipped with tungsten tipped flails 80x8 - 8 points
Achieves a rough surface structure, very good prepping rate, normal service life.
•Paint removal
•Grooving concrete
•Milling / scabbling / planning concrete
•Thermoplastic & coldplastics removal on asphalt & concrete
Various types of cutters are available to suit all the different kinds of applications.
-Tungsten Carbide Tipped Cutter -for all concrete texturing, scabbling, planing and grooving applications.
-Star Cutters -for the removal of paint, coatings and laitance. Deck descaling.
-Beam Cutters -for the removal of paint, coatings, laitance, grease, dirt and ice deposits. Deck descaling.
-Milling Cutter -for the removal of thermoplastic road and runway markings, bituminous and rubber deposits.
Support:
If you are a distributors/tool hire company/technical engineer/contractors for surface prep machines, we will be able to provide all kinds of tool replacement on your concrete milling scarifiers, floor grinding machines or floor planers for you. For any technical data or help, pls contact us right now and we will reply within 24 hours.
For more information about the dimensions, please kindly refer to below data to help you choose the most suitable cutter part for your scarifiers planers. And you can visite us at : for more information.
Contact information:
Zhuzhou Xinhe Industry Co.,Ltd
Add: No.9 Zhongda Road, Tianyuan District, Zhuzhou, Hunan,China
Direct Line: 86-18073318700 (WeChat / WhatsApp)
Email:carly@zzxinhe.com
Send Inquiry to This Supplier
You May Also Like
-
8PT Spike Pin Edges Concrete Tct Tungsten Carbide Scarifier Cutter Bits Teeth Cutter for Grooving Machine Drums in Line Removing and Surface PlanningUS$ 1 - 2.5MOQ: 100 Pieces
-
5pt Carbide Tct Cutter Flails Cutting Wheel Spare Part For Concrete ScarifierUS$ 1 - 2.5MOQ: 100 Pieces
-
6 Tips TCT Scarifier Cutters With Carbide Teeth Concrete Asphalt SurfaceUS$ 1 - 2.5MOQ: 100 Pieces
-
8 Tips Tungsten Carbide Cutters Road Cutter Cement Scarifier Flails Prep ToolsUS$ 1 - 2.5MOQ: 100 Pieces
-
Tungsten Carbide Scarifier Milling Cutter For Removing Painted LinesUS$ 1 - 2.5MOQ: 100 Pieces
-
Concrete Scarifier Parts & Accessories, 5/6 Teeth Concrete Milling Cutters Miller , Tungsten Carbide Scarifier Blades FailsUS$ 1 - 2.5MOQ: 100 Pieces
-
Scarifier Parts & Accessories, Tungsten Carbide Scarifier Milling Cutter For Removing Painted LinesUS$ 1 - 2.5MOQ: 100 Pieces
-
Concrete Scarifier Parts & Accessories, 5/6 Teeth Concrete Milling Cutters Miller , Scarifying Machines AccessoriesUS$ 1 - 2.5MOQ: 100 Pieces
-
5pt Carbide Tct Cutter For Electric Floor Pre Concrete Scarifying Machine Construction EquipmentUS$ 1 - 2.5MOQ: 100 Pieces
-
Scarifier Parts & Accessories 6 Pt Carbide Cutters CP206-T On Floor Scarifiers EDCO Crete Planers CPM8US$ 1 - 2.5MOQ: 100 Pieces
