Contact Platform Support
Help CenterVacuum Suction Top Box for Ceramic Dewatering Element
Related Products
-
95% Al2O3 Alumina Ceramic Mosaic Tile by China SupplierUS$ 1 - 1200MOQ: 1 Short Ton -
Ceramic Dewatering Elements for Paper Making With High QualityUS$ 1 - 20MOQ: 10 Pieces
-
China 92% Alumina Ceramic Square Mosaic Wear Plates TilesUS$ 1 - 1200MOQ: 1 Short Ton
-
China Cheap Wholesale Alumina Wear Resistant Rubber Backed Ceramic PlateUS$ 1 - 20MOQ: 1 Piece
-
Paper Industry Medium Consistency Sand Remover for Kraft PaperUS$ 1 - 20MOQ: 1 Dozen
Qijing Trading Co., Ltd. main business: industrial ceramics, refractory materials, corundum wear-resistant ceramics, papermaking equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, slag removal Equipment and accessories, wear-resistant pipes, mining equipment and accessories, alumina ceramic parts, thermocouple protection tubes, special-shaped fittings, pipe liner patch, pipe liner pipe, wear-resistant refractory ceramic parts, elbows, tees , Production and sales of electronic insulation materials.
Customer first, quality first! Your satisfaction is our unremitting pursuit! As long as you request, we will complete the rest. Qi Jing Trading goes hand in hand with you to create brilliant!
Feature & Structure
|
Alumina Ceramics Sub 99% AL2O3 | ||
| Property | Unit | Value |
| Bulk Density | g/cm3 | 3.86 |
| Hardness (HV) | Gpa | >14.7 |
| Bending strength | MPa | ≥360 |
| Fracture toughness | MPa | 5-6 Mpa.m 1/2 |
| Coefficient of thermal expansion | 7.0-7.5x10-6.0c | |
| Porosity | % | |
| Water absorption | % | |
| Surface roughness | --- | ≤0.5μm |
| Particle size | Submicron | |
| Vacuum Suction Box & Forming Machine | Dewatering Box | Forming Board Box |
| UItra-fine grain /Uniform and dese | UItra-fine grain /Uniform and dese | Best choice of dot |
| Low friction coefficient | Low friction coefficient | Improve paper quality |
| Stable struture-tray-frame | Angles are avaible to choose | One time made ceramic |
| High-strength matrix of fiber glass /carbon fiber | Low adhesive rate for mixtures | Stable struture |
| Choices for the percentage opening | Effectively protect forming wire | High-strength matrix of fiber glass /carbon fiber |
| Lubricant equipment | Firmly fixed structure | Firmly fixed structure |
| Movable bar | Easy to replace | Easy to replace |
| Material: | Alumina Ceramic | Shape: | Cone-shaped Tube |
| Temperature: | Compressive Strength: | ≥620Mpa | |
| Type: | Ceramic Tubes | Usage: | Wear-resisting Material |
| Bulk Density: | ≥ 3.65 G/cm3 | Flexural Strength: | ≥610Mpa |
| Application: | Industrial Ceramic | Specific Resistivity: | ≥1015Ω/cm/100ºC |
| Max OD: | 760mm |
Transport and installation precautions:
Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.
2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.
3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.
4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.
5. When using flange connection, the flange end shall be flush with the end of the composite pipe.
6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.
Packaging
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For regular customers, 30% T/T in advance ,balance after received the B/L copy
Send Inquiry to This Supplier
You May Also Like
-
92%Alumina Ceramic TubeUS$ 1 - 20MOQ: 10 Pieces
-
Weldable Alumina Ceramic Brick Liner and Ceramic Linings for Abrasion ResistanceUS$ 1000 - 1200MOQ: 1 Short Ton
-
Competitive Price Abrasion Resistance Ceramic Pipe Lining for Mining IndustryUS$ 1 - 20MOQ: 10 Pieces
-
Competitive Price Abrasion Resistance Ceramic Pipe Lining for Mining IndustryUS$ 1 - 20MOQ: 10 Pieces
-
High Consistency Sand Remover for Paper Pulp MakingUS$ 1 - 20MOQ: 1 Dozen
-
95% Al2O3 Alumina Ceramic Mosaic Tile by China SupplierUS$ 1 - 1200MOQ: 1 Short Ton
-
Chinese Ceramic Plate Type 95% Alumina Ceramic Tile With High Wear Resistance and Corrosion ResistanceUS$ 1 - 1200MOQ: 1 Short Ton
-
92% 95%97%99% High-quality Wear-resistant and Corrosion-resistant Alumina Ceramic Lining PatchUS$ 1 - 20MOQ: 10 Pieces
-
92% 95%97%99% High-quality Wear-resistant and Corrosion-resistant Alumina Ceramic Lining PatchUS$ 1 - 20MOQ: 10 Pieces
-
Can be Customized 92%95%97%99% Alumina Ceramic Shaped Pipe FittingsUS$ 1 - 20MOQ: 10 Pieces
