2Nm 24V AC/ DC modulating type 0-10V control electric damper actuator for drive building automation system (HVAC)

2Nm 24V AC/ DC modulating type 0-10V control electric damper actuator for drive building automation system (HVAC)

Overview:
For operation of air control dampers in HVAC system.
Toque : 2Nm
Nominal voltage : AC / DC 24V
Control: 0-10V / 4-20mA optional

Features:
  Easy installation: through the universal shaft holder fixed to the throttle shaft.
  Manual control: manual operation via buttons when needed.
  High reliability: drive with overload protection, no limit switches, run to the end of their own to stop.
  Mechanical limit: Built-in adjustable mechanical limit mechanical limit.
  Output signal: in the range of 0-100% can output a switching signal.
  -DS Type contains a set of auxiliary switch

Technical Parameters:

Torque: 4Nm
Life: a rotating 60,000 times
Wind board area: 1.5m2
Running time: 50S (90º)
Power supply: AC / DC 24V
Frequency: 50 / 60HZ
Direction of rotation: manually adjustable
Manual operation: with
Rotation angle: 0- 90 °, maximum 95º rotation angle can be adjusted by adjusting the mechanical limit
Position indicator: mechanical indication
Running state power: 5W, 0.5W standby
Noise: 45dB
Protection level: Ⅱ
Protection: IP44
Ambient temperature: -20 ~ + 50 ℃
Humidity: 5-95% RH
Damper shaft length:> 50mm
Throttle Week Specifications: 10_20mm circular shaft / 16 × 16 square shaft
Standard: CE compliance

Image