AS/NZS 3112:2011 - Standards New Zealand test gauges

   AS/NZS 3112:2011 - Standards New Zealand gauges

 1. Application:

• Our company  offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GBDIN, VDE and other similar international standards.
• Such standards require the checking of size &  definition etc, these gauges are constructed from senior stainless steel and appropriate steel with a hardness  of at least 60HRC and a roughness according to standard require.
• Australia plug  and socket gauge is strictly designed and manufactured according to the relevant standard requirements of AS/NZS 3112 figure A, B, C, D, E, F, G size, amount in 9pcs.
• This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112 standards. And the mainly application industries is electronics, electrical  appliances, plugs and sockets and other similar areas. 
• Standard: AS/NZS3112, BS1363-2, VDE0620-1:2010-02, GB1002, GB1003 etc. 
   

2. Features:

• Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
• Surface corrosion and abrasion resistance  can   resist normal contact corrosion and not embroidered  patch (the operator hand may exist in the sweat, the corrosion effect equivalent to NACL salt solution or  NH4CL salt solution corrosion);
• Material hardness is more than 60HRC;
• Material thermal expansion coefficient is small, dimensions and tolerances is stable and reliable.

3. Quantity: