Discount! IEC 61032 test pin 12 with 50mm test probe

2019 Discount! IEC 61032 test pin 12 with 50mm test probe

Article NO.:BND-12

In line with the IEC61032 probe 12 standard requirement

Technical parameters

1, The probe Diameter :4mm

2, The probe Length:50mm

3,Dam- board Diameter:25mm

4, Dam- board Length:4mm

5,Reference Standard: IEC61032:1997 in figure 8

Appliance:

The long test pin meets to the standard requirements of IEC 61032 &GB 16842, it is used for simulating screwdriver or similar sharp knife tools in the test. It is mainly used to check whether the live parts of type 0 device and type Ⅱdevice are touched .The handle dimensions (Ø 10 and 20) are not critical.

NOTE: The test pin dimensions are those given in Figure 9, test probe 13 of IEC 61032. In some cases the tolerances are different.