U L1278 figure 9.1Finger Probe PA160

Aluminum specimen box+ carton box

UL1278 figure 9.1 electrical Metal detector Finger Probe PA160 

UL1278 figure 9.1 electrical Metal detector Finger Probe PA160     

PA160 Test probe

Model:PA160

Technical Parameters:

1, Total Length :88.9mm(3.5 inch)

2, Head Length :25.4mm(1 inch)

3, Head Radius: R 3.2mm(1/8 inch)

4, Former Head Diameter:12.7mm(1/2 inch)

5,Tail Diameter :25.4(1 inch)

6, Reference standards  UL1278 figure 9.1 (PA160)

Appliance:

1,The rotor of a motor, a pulley, a belt, a gear, a fan, or other moving parts shall be enclosed or guarded to reduce the risk of injury to persons.

2,A fan blade shall be constructed of a material and in such a manner to reduce the risk of its breakage or its release of parts that could cause a risk of injury to persons.

3,The portion of a fan blade that can cause a risk of injury to persons shall be guarded so that the probe shown in Figure 9.1 cannot touch the part when inserted with a force of 1 lb (4.4 N) through any opening in the guard.

Exception: This requirement does not apply to a part or portion of a part that must be exposed to enable a heater to perform its intended function

Product picture:

Company Profile

Shenzhen Bonad Instrument Co., Ltd.

 14 Stanards drafted and issued by Labthink  -- 100 Patents granted by Labthink -- 410 m2 Laboratory to provide testing services  -- 20 years experienced lab technicians to provide solutions -- 12 months warranty  -- Remote Services (Free of Charge allthrough lifetime)

View more

Contact Us

Shenzhen Bonad Instrument Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Shenzhen Bonad Instrument Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now