Plastic Melt Flow Index Tester price

Brief Introduction:

Melt flow rate instrument is also called plastic, resin melt index instrument is used for mensurating melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department

Type:

1. The digital display

Set the electronic P.I.D regulator for temperature control, which is completely in line with national standards (cannot test melt volume flow rate and melt density).The machine also sets up the counter, which is convenient for measuring cutting time.The instrument works with the cutting and weighing method, and the scope is wide.

2. LCD is fully automatic.

Single chip microcomputer temperature control and program control, under test ended, and automatically display the time needed for a specific volume of the melt flows through the mouth mould, the calculation flow rate value, can repeat of high precision, easy to operate.The system is involved in temperature control.The manual cutting device can ensure the smooth detection by cutting and weighing method when automatic detection is not possible.Compact structure, beautiful shape, high precision, easy to use accessories.

3. Microcomputer controlled automatic.

The melt indexer sets up a single chip microcomputer automatic test device and electronic automatic cutting device.After the microcomputer system has input the corresponding parameters from the light touch key, the test is finished, namely, automatic calculation and printing of flow rate value, high repeatability and convenient operation.The temperature control of the use of computer software technology, which can automatically eliminate because of the power supply voltage fluctuation and the influence caused by environmental changes, and when the temperature of the instrument and the standard temperature thermometer (special correction to match) appeared deviation, the operator can easily random fixed.The electronic automatic cutting device can be automatically cut at the preselected interval to calculate the final result when automatic detection is not possible.

Main application:

Melt flow rate instrument, used to measure the thermoplastic resin melt mass flow rate (MFR), melt flow rate (MVR) volume and the density of the melt, it is not only applicable to the high melting temperature of polycarbonate, nylon, fluorine plastic, aromatic sulfones engineering plastics, also applies to polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin with lower melting temperature, such as plastic test, widely used in plastic raw materials, products, petroleum and chemical industries, and related colleges and universities, scientific research units and the commodity inspection department.

Features:
1.Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).
2.Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc. Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:
A: heating speed, the dinky overshoot.
B: constant temperature and high precision.
C: in the packing after, can quickly restored constant temperature condition.

We have professional packing workers to pack your products!

Packing:

1. Out packing:Standard export wooden case.

2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.

3. Checking teams: Specialized staff to inspect and classified your goods.

Shipping:

You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt ofyour order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.

ZONHOW has been providing companies with materials testing equipment for over 10 years,addressing the

many quality analysis needs of products. It will perform tests in conduct tensile, compression,bending, shearing,bonding strength, peeling, tearing and other tests. It is suitable for rubber, plastic,leather, metal, nylon line,

fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.

There are many built-in test procedures to meet most requirement and standards. It is our objective at ZONHOW to provide our customers the best ownership experience by delivering the highest quality products and accessories that offer accurate and reliable test results and time savings.

Our Products

1.Are your company a trading one or a factory ?Factory + trade (integration),10 years focusing on test instruments field,3 years exporting experience.

OEM is also acceptable for us.

2.How to choose the most suitable products?

Our professional team will give you the best suggestion as long as you tell us what kind of test you

need to do and the required specification.

3.What’s the delivery term?

At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20

working days after deposit receipt. If you are in urgent need, we can consider making special

arrangement for you.

4.Do you accept customization service?

Yes, of course, we can not only offer standard machines, but also customized machines according to

your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.

5.Can we visit your factory before order?

Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to

arrange hotel and pick up you from airport.

6.Do you have customers of our country before?

Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK,

Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam,Iran,

Brazil and so on.

7.How about your warranty?

Generally, our warranty is one year. Within the warranty period, we can offer technique support and

part parts change, necessarily, our engineers may go to your place for better service.

8.How about the packing for machine, is it safely protected during transportation?

Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many

testing machines abroad by sea or by air without damage.

9.What is the order process?

Inquiry - quotation - communication - order confirming - deposit payment - production - testing and

debugging - balance payment - packing - delivery - customer receiving - after service. 

10.How to install and use the product

The product is shipped with an operating instructions and video of English version.

If you want to know more information about us

         Please leave a message below and click " send "

                      Thank you very much for your time and attention!