Medical Protective Clothing

This product is the main raw material for nonwoven fabric, accessories for nylon zipper, mouth elastic cuffs feet, polyester thread, made by cutting, sewing, non sterile, disposable.
properties :
1, appearance should be consistent with the table below:
Index requirements
Color each isolation gown raw material color is consistent, without clear off color
The stain clothing should be dry, clean appearance, no mould, no stains
Deformed surface adhesion is not permitted in isolation gown, cracks, holes and other defects
The thrum of the thread surface there can be no longer than 5 mm
Size according to the requirements of table 1
Table 1 even body type specifications (cm)
Specification height bust sleeve cuff feet long
S 18 24, 168, 120, 84
M 18 24, 173, 125, 86
L, 178, 130, 90 18 to 24
XL, 183, 135, 93 18 to 24
XXL 18 24, 188, 140, 96
XXXL 18 24, 193, 145, 99
Deviation of plus or minus 2 + 2 + 2 + 2 + 2

2, water permeability resistance: key parts hydrostatic pressure should be not less than 1.67 KPA (17 cmH2O).
3, surface wet resistance: the lateral touch water level should be not less than 3.
4, breaking strength, breaking strength of key parts material should be not less than 45 n.
5, tensile rate: key parts material of elongation at break shall be not less than 15%.
6, elastic: no gap, bolt, springback after stretching.

[applicable scope] : this product is used for outpatient medical institutions, and checkout room for common isolation ward.

[contraindications] : this product is temporarily not found contraindication.
[usage] :
1, before use, please choose and confirm the specifications of isolation gown.
2, according to the figure choose to suit their own specifications
3, good will wear gowns, guarantee the placket closed in good condition. According to the need to decide whether to wear other protective equipment.

precautions :
1, please check whether the packing is in good condition before use, and to confirm packing mark, production date, validity, used in the period of validity, damaged packaging, it is prohibited to use.
2, before take off protective gloves to avoid contact with the outer surface of the protective clothing, gloves off to try to contact with the inner surface of the isolation gown, isolation gown should be within a surface after take off, wrap outside surface and pollutants inside, avoid pollutants in contact with the human body and environment, take off the protective equipment to focus on, avoid expansion of pollution in the process.
3, the product shall have the professional personnel to use; Non-professional workers do not use this product, in order to avoid accidents.
4, this product is limit the disposable use, destroyed after use.