Engine Valve Carbon Cleaner For Sale Clean Carbon In Engines Decarbonizing Kit DC 12V

Engine Valve Carbon Cleaner For Sale Clean Carbon In Engines Decarbonizing Kit DC 12V

The influence of engine carbon:

The experiments show that the additive can cause sediment in the engine, especially the intake valve, and it is not only difficult to eliminate the sediment at this time, but also will take lots of money and the time. In addition, the function of additive can only maintain a very short validity period, but also may have other effects on the engine. For example, it may cause fuel gelation or waxing, fuel pump wear and tear aggravate, the running temperature rising of the engine, increasing the amount of pollutants dissolved in the tank, and so on. The other methods of engine carbon removal, such as dripping, spray, and disassembly, are either localized or time-consuming (it takes one to two days to dismantle the engine, which still cannot meet the economical need. engine carbon cleaning machine can help to solve these problems, which can clean five parts of engines. 

Product Introduction:

Compared to the HHO carbon cleaner, engine carbon cleaning machine can remove the carbon deposit much completely because of the cleaning agent. The special cleaning agent for this machine is effective but with the chemicals. And during the cleaning process, it needs to dismantle some parts of engines, especially the pipeline, but it can clean the engine thoroughly. The dirt can be exhausted from the exhaust pipe by stepping the gas. After carbon removal,20% of engine power is increased, 70% pollution is reduced, the engine noise is decreased, oil consumption is reduced. 

Parameter:

Product advantages:

1. This machine can do catalytic converter carbon cleaning with water-based or oil-based, which is the first innovation in China.

2. It can clean carbon for five engine system parts: catalytic converter, combustion chamber, fuel system, spark plug, and intake valve.

3. After carbon removal,20% of engine power is increased, 70% of pollution is reduced, the engine noise is decreased, oil consumption is reduced.

4. Do not need to take every engine parts down to remove the carbon.

5. The endoscope built-in can make carbon cleaning effectiveness more visible.

Product Advantages:

The TD-501 engine carbon cleaning machine is used to remove the carbon deposit in the gasoline vehicles with the special cleaning agent. It can clean carbon for five engine system parts: catalytic converter, combustion chamber, fuel system, spark plug, and intake valve. Its effect can be visible immediately, the fouling can be released by the vehicle emission system through the cyclic decomposition process, which can make the performance of the vehicle restored as a new car, and the vehicle starts smoothly, the refueling becomes light, the engine power is increased, and the effect of saving fuel and reducing air pollution have achieved.

The impact of engine fouling:

The engine fouling consists of Gum, Shellac, Varnish, and Carbon. Due to the quality difference of automobiles, improper driving habits, urban congestion driving, and poor air quality, etc, the pollutants can be produced in the engine. And these pollutants are firstly produced from the car injector because the diameter of the nozzle needle valve is about 0.002 inch, which is as exiguous as the human hair. Once the engine clogged caused by the fouling, it will immediately affect the injection fuel efficiency of its original automatization. As long as 10% of the fuel quantity is limited, it will lead to incomplete combustion of the fuel supplying to the engine and increase the carbon accumulation. When the carbon accumulation in the engine reaches to a certain extent, the engine function of the whole fuel supply system is not smooth, resulting in slow jitter of acceleration, the powerlessness of oil-consuming, the difficulty of starting up, intermittent flameout, harmful exhaust gas emission, and the temperature rising, which cause the driving performance declining gradually. 

The cleaning methods of Combustion chamber:

1. Inject the cleaning agent 

(1) open the injection cap and add a proper amount of cleaning agent to tighten the bottle cap.

(2) remove the spark plug of the automobile engine (the spark plug can also be cleaned with cleaner)

(3) the cleaning machine connects the air source, adjusts the pressure of the regulating valve to 2Kg/cm, adjusts the valve to the foaming position, and inserts the foam pipe into the combustion chamber from the spark plug mouth. Turn on the switch, the cleaning agent foam into the combustion chamber can be filled, in turn, each cylinder filled, immersion 5-10 minutes, (Do not wash in a long time, if necessary, there can be a secondary cleaning)

2. The recovery of Waste liquid  

(1) insert the return pipe into the bottom of the combustion chamber and transfer the valve to the recovery position, then the internal cleaning agent can be pulled back to the machine, each cylinder is carried out in turn, and the combustion chamber is blown dry with the air gun.

(2) the recovered waste liquid can be discharged by opening the drain valve in the side of the machine.

3. Cleaning up and restoring

(1) after the combustion chamber has been cleaned, it can be filled back to the spark plug and accessories.

(2) when engine inspection is started, the inspection should be stopped immediately if there is something unusual.

FAQ:

1. Why do I need to carbon clean my car?

Incomplete combustion causes carbon deposits in your vehicle engine. Carbon is one of the reasons for high fuel consumption, poor engine performance, and increases exhaust emissions.

2. When do I need to carbon clean my car?

We recommend servicing your vehicle every 15,000km or 6 months, whichever comes first. 

3. What type of car can use your service?

All petrol, diesel or LPG vehicles trucks buses.

4. Which language handles the LCD display?

It has multiple languages built-in, you can switch between various modes at will.

5. What is the biggest feature of the engine carbon cleaning machine?

It has a catalytic converter cleaning function not available in other similar products.

6. What are the main functions of the engine carbon cleaning machine?

Fuel system cleaning, intake system cleaning, catalytic converter cleaning (oily/water-based), combustion chamber foam decarburization, HD display, and endoscope.