Laminar Flow Cabinet Single Person Local Purification, Product Protection Area
JH1 laminar air flow cabinet ( single person ):
Applicable in the field of protection of biotechnology, pharmaceutical, life sciences and precision electronic products.
JH series clean bench combined with perfect airflow mechanical design for the operator to create a partial purification work environment so that experiments can be carried out smoothly.
CE certification, two years warranty period.
Product introduction:
●Integrated LCD dot matrix LCD display, real-time display the status of lighting, sterile, air flow and other parameters.
●User-friendly design, with sterilization, lighting, interlock functions to protect the operator from UV light burns and ensure safe operation.
●Wind speed multi-level adjustable, the air volume can be adjusted according to the user.
CLEANFLOW™ clean air technology:
●Centrifugal wind wheel low-power motor, based on airflow mechanics principle, arc-shaped large-diameter inlet design to reduce turbulence generated to ensure low noise operation of the system.
●Reasonable duct design, optimized net press box, with micro-mesh design layer outflow wind deflector, convex, no dead ends, to ensure the uniformity and stability of the airflow.
●Standard early-efficient and efficient double-filter, primary filter to avoid airflow dust particles to enter and extend the life of high efficiency filter. High efficiency filter without clapboard HEPA, retention efficiency of 99.99%.
●According to the customer's requirements, CLEANFLOWTM series with the vertical flow and horizontal airflow
Ergonomically designed:
●The front overall tilt design, low noise operation, increase operation comfort.
●Operating room standard with gas water interface, splash-proof power outlet to facilitate the experiments carried out smoothly.
●With weight up and down sliding front door, can be anchored.
●Built-in lighting system to provide the best illumination angle and brightness, reduce visual fatigue.
●On both sides of translucent double-glazed side windows, to enhance the light permeability, and non-convex design of the work area, no death and no spoiler design.
●The platform using an anti-corrosion resistance of SUS304 stainless steel plate forming the front of the arc-shaped design and increase operator comfort.
Modern manufacturing processes:
●Sheet metal parts use laser cutting and CNC bending technology. Cold-rolled sheets use three line of acidification anti-rust technology. Incubator surface use workmanship of spraying plastics.
Easy to clean:
●The early effect of the filter core and the air inlet stencil a shape, facilitate regular on the early effect of filter element folding loading and cleaning.
●The polished design of the work surface as a whole, without pits, no dead ends on both sides, and a minimum of stitching design, easy to clean and disinfect.
Convenient maintenance:
●Removable combination tripod, easy to transport and move, Stand height adjustable.
●Eversion design of the front control panel to facilitate the electrical components, maintenance and replacement.
●In order to make the device able to achieve long-term cleanliness requirements, it is recommended to the early effect of the equipment and high efficiency filter in use for some time to clean or replace.
Technical Parameters:
Product type
|
JHP horizontal super clean bench series
|
JHZ vertical super clean bench series
|
||
one person JHP-1 |
two person JHP-2 |
one person JHZ-1 |
two person JHZ-2 |
|
Cleanliness rating |
The international ISO 14644.1 standard, CLASS 5 (U.S. Federal 209E, 100 level) |
|||
wind speed |
0.3~0.6m/s(Adjustable) |
|||
Noise (dB) |
≤62 |
|||
Vibration half peak |
≤3μm(X、Y、Z direction) |
|||
High efficiency filter |
Efficiency 99.99% |
|||
Illumination(LX) |
≥300 |
|||
Work environment |
Ambient temperature 10~30℃, Relative humidity below 70%, No obvious vibration and dust around |
|||
Overall size(mm) (H×W×D) |
1585×990×735 |
1585×1460×735 |
1585×990×735 |
1585×1460×735 |
Inner size(mm) (H×W×D) |
500×830×550 |
500×1300×550 |
500×830×680 |
500×1300×680 |
Voltage(V)/ |
AC220V/50Hz |
|||
Power(W) |
200 |
400 |
200 |
400 |
Net weight (KG) |
120 |
210 |
110 |
210 |
Shipping weight(KG) |
130 |
235 |
130 |
235 |
Packing size(mm) (H×W×D) |
1030×1180×855 |
1030×1650×855 |
1030×1180×855 |
1030×1650×855 |
Laminar Flow Cabinet:
/laminar-flow-bood/20170531/15.html
Send Inquiry to This Supplier
You May Also Like
-
Kenton Supply JH1 Laminar Airflow Hood Single PeopleUS$ 1355 - 1455MOQ: 1 Case
-
Super Clean Workbench, Dust-free Cleaning Workbench Price Quotation Laboratory Laminar Flow CabinetUS$ 1000 - 1026MOQ: 1 Case
-
Electric Thermostatic Water Tank, China's Famous Manufacturer KENTON Instrument, Quality AssuranceUS$ 112.5 - 173MOQ: 1 Case
-
Laboratory Equipment Manufacturers Platelet Holder,Globally AvailableUS$ 2520 - 3867MOQ: 1 Case
-
Competitive Price China Microbiological Incubator,Digital Display, Stainless Steel Liner, Quality AssuranceUS$ 568 - 710MOQ: 1 Case
-
Humidity Chamber Price Quotation for Manufacturer of Constant Temperature and Humidity ChamberUS$ 1492 - 1692MOQ: 1 Case
-
Climatic Chamber Manufacturer Price Quote, Industrial Laboratory Constant Temperature Equipment ManufacturerUS$ 3518 - 5411MOQ: 1 Case
-
The Upgraded Version of Constant Temperature Thermostatic Incubator Has High Sexual Price Ratio.US$ 852 - 1308MOQ: 1 Case
-
Light Stability Chamber Failure Evaluation, Accelerated Test and Long-term TestUS$ 4129 - 5161MOQ: 1 Case
-
Hot Air Oven Kenton Industries Electric Heating Drying Oven-202 Natural ConvectionUS$ 133 - 166MOQ: 1 Case