CR825 Multifunctional Test Bench With All Testing Functions ,PT Cummins ,HPI (Q60/X15) CR825S

CR825 is used to 320D PUMP ,VP37 PUMP ,VP44 PUMP 

1, All common rail injector (include piezo )

2,All common rail pumps

3,HP0 PUMP testing

4,EUI/EUP testing

5,HEUI injector testing

6,HEUI pump testing

7,CAT320D pump testing

8,Electronic pump testing

9,Measurement unit testing

10,Armature stroke AHE tester

Ø  Optinal Function:

1,VP37/VE37 electronic pump

2, Vp44 pump test

3, TICS electronic pump

4, Electronic unit pump

5, General pump test(E2 pump)

Main Features
1.Test all the manufacturers of common rail injector
2.Test all the manufacturers of piezo injector
3.Test all the manufacturers of common rail pump
4.Test DENSO HP0 pump
5.Test CAT common rail (HEUI) injector
6.Test CAT common rail (HEUI) engine oil pump
7.Test CAT 320D common rail pump (the world’s first successful development)
8.Test EUI/EUP (can adjust the lift but not to change the camshaft)
9.Drive circuit board(solenoid valve electric parameters to enhance the voltage current,time,pull in voltage ,current,time,keep voltage ,current,time,according to the setting of parameters of production factory)
10.Accept the speed sensor ,encode signal,high speed solenoid valve drive signal.Accept the speed sensor ,encoder signal,output 2 PWM drive signal, 2 way solenoid valve drive signal,1 high speed solenoid valve drive signal.
Driving signal waveform can be programmed.