China Supplier Prime Hot Rolled SS400 Steel H Beams

China Supplier Prime Hot Rolled SS400 Steel H Beams

Product name: China Supplier Prime Hot Rolled SS400 Steel H Beams

Keywords: Steel H Beam

Standards: GB/ASTM/SS400/ST52

Material: Q195 Q235 Q345

Web Thickness: 10mm

Web Width: 150mm

Flange Thickness: 7mm

Flange Width: 150mm

Length: 12m

Technology: Hot rolled

Surface treatment: Black

Application: construction/welding /green house or water system 

Container type: 20gp/gh or 40gp/gh

Loading capability: 25-27ton each container

Package type: Plastic caps on both ends, Steel bundle, Woven bag or according to customers' request

Payment terms:30%TT advanced and balanced pay before loading

Factory production ability: 10000ton monthly

Delivery time: within 15-20days

Loading port: TIANJIN port 

H Beams

H Beams is an economical section and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Because all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is a new type of economic construction steel. The shape of the H Beams section is economical and reasonable, and the mechanical properties are good. The points on the section are evenly extended and the internal stress is small during rolling. Compared with ordinary I-beams, it has the advantages of large section modulus, light weight, and metal saving. The structure is reduced by 30-40%; and because the inside and outside of the legs are parallel, and the leg ends are at right angles, the assembly and assembly into components can save welding and riveting workload by up to 25%. It is often used in large buildings (such as factory buildings, high-rise buildings, etc.) that require large load-bearing capacity and good cross-section stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, and foundation piles.

H-beam is economical cross-section steel with better cross-section mechanical properties, which is optimized and developed from I-beams. In particular, the cross-section is named after the English letter "H".

HGB H beams characteristics are as follows:

1.Wide flange and large lateral stiffness.

2.Strong bending resistance, about 5% -10% than I-beam.

3. The two surfaces of the flange are parallel to each other, which makes connection, processing, and installation easy.

4. Compared with welding I-beams, it has low cost, high accuracy, and small residual stress. It does not require expensive welding materials and weld seam detection, which saves about 30% of the cost of manufacturing steel structures.

5. Under the same cross-section load, the hot-rolled H steel structure is 15% -20% lighter than the traditional steel structure.

6. Compared with the concrete structure, the hot-rolled H steel structure can increase the use area by 6%, while the structure's own weight is reduced by 20% -30%, which reduces the internal force of the structural design.

7.H-beams can be processed into T-beams, and honeycomb beams can be combined to form various cross-section forms, which greatly meets engineering design and production requirements.

visit our website:

/hot-rolled-black-square-tubes/square-tubing.html