Ceramic Laser Reflector
Ceramic Laser Reflector for Pump Chamber
Introductions
High purity porous alumina ceramic of 99% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity.
Prime Features
1. Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity
2. 97% reflectance efficiency at 600-1000nm
3. Reflectance efficiency exceeds 95% across the wavelength range 400-1200nm (see curve)
4. Controlled porosity
5. Good thermal conductivity
6. High electrical resistivity
Physical properties
1. Color: White
2. Bulk density (fired), Mg/m3 :3.1
3. Porosity (apparent), % nominal :22
4. Flexural strength (ASTM C1161, 3-point), MPa :170
5. Thermal expansion coefficient
200-500C, 10-6/C 7.9
200-1000C, 10-6/C 9.0
Typical Applications
1. Pumping chambers for flash lamp and continuous wave lasers using media such as Nd:YAG lasers,
Alexendrite — low to high power, single or multiple lamp designs used for welding, cutting, marking and in medical lasers.
2. Layered and segmented pumping chambers for diode pumped lasers
3. Intense Pulse Light (IPL) applications for cosmetic surgery
For more about this project, pls feel free to get in touch.
Send Inquiry to This Supplier
You May Also Like
-
Customized Alumina Ceramic NozzleUS$ 5 - 10MOQ: 10 Pieces
-
Textile Ceramic GuiderUS$ 2 - 5MOQ: 10 Pieces
-
Alumina Ceramic PlateUS$ 3 - 5MOQ: 10 Pieces
-
Alumina Ceramic Lamp Holder/base/cap High Wear-resistanceUS$ 10 - 15MOQ: 10 Pieces
-
Alumina Ceramic Ring High Strength Insulation Resistance for IndustryUS$ 10 - 15MOQ: 10 Pieces
-
Alumnia Ceramic Tubes for Industial UsageUS$ 5 - 8MOQ: 10 Pieces
-
Alumina-Based Ceramic Cavities For Laser Reflectors/INNOVACERAUS$ 100 - 200MOQ: 1 Piece
-
Ceramic Reflector for IPL and Medical LasersUS$ 100 - 200MOQ: 1 Piece
-
99% Square Alumina Ceramic Bulletproof TilesUS$ 1 - 1.2MOQ: 100 Pieces
-
Stock 99% Hexagon Alumina Ceramic Bulletproof TilesUS$ 1 - 1.2MOQ: 100 Pieces