Supervisory pressure switch DPS40

The DPS40 series pressure type supervisory pressure switches shall be installed on system piping as designated on the drawing and/or as specified herein. Switched shall be provided with 1/2” NPT male pressure connection and to detect an increase and/or decrease from normal system pressure in automatic fire sprinkle system. Typical applications are: Dry pipe valves, Pre-action valves, or pressure tanks. The DPS40 series pressure switches are factory set for use in a normal 40psi system. The DPS40-1 is factory set to respond at 30psi at decreasing pressure and DPS40-2 is factory set to respond at 50psi at increasing pressure and 30psi at decreasing pressure

• Maximum System Pressure:  300PSI (2.07MPa)

• Factory Setting:       DPS40-1 operates at decreasing pressure at 30psi

                                   DPS40-2 operates at increasing pressure at 50psi

                                         and at decreasing pressure at 30psi

• Differential:             Approximately 3psi@10psi, 6psi@100psi

• Maximum Adjustment  Pressure Range:             10 to 60psi

• Contact Ratings:                   DPS40-1: One set SPDT (Form C)

                      DPS40-2: Two sets of SPDT (Form C)

                      10.1Amps at 125/250 VAC

                      2.0Amps at 24 VDC

• Operating Temperature Range: -40º F to 160ºF (-40ºC to 71ºC)

• Enclosure Rating:                 NEMA 4- suitable for indoor/outdoor use

• Warranty:                            3 Years