Permendur 2V
High Saturation magnetic induction soft magnetic alloys
Note:
Hiperco 50A alloy is a soft magnetic alloy which has been used primarily as magnetic core material in electrical core material in electrical equipment requiring high permeability values at very high magnetic flux densities. The magnetic characteristics of this alloy permit weight reduction, reduction of copper turns, and insulation in the end product when compared to other magnetic alloys having lower permeabilities in the same magnetic field range.
Relative Grade :
| Grade | U.K. | Germany | U.S.A. | Russia | Standard |
| 1J22 | Permendur | Vacoflux 50 | Supermendur HiperCo50 |
50КФ | GB/T15002-1994 |
Grade and Chemical Composition
| Grade | Chemical Composition (%) | |||||||||
| C≤ | Mn≤ | Si≤ | P≤ | S≤ | Cu≤ | Ni≤ | Co | V | Fe | |
| 1J22 | 0.04 | 0.30 | 0.30 | 0.020 | 0.020 | 0.20 | 0.50 | 49.0~51.0 | 0.80~1.80 | Balance |
Physical Property
| Grade | Resistivity /(μΩ•m) | Density/(g/cm3) | Curie point/°C | Magnetostriction Cofficient/(×10-6) | Tensile Strength,N/mm2 | |
| Unannealed | Annealed | |||||
| 1J22 | 0.40 | 8.20 | 980 | 60~100 | 1325 | 490 |
Send Inquiry to This Supplier
You May Also Like
-
Invar 36 Invar Alloy 36US$ 15 - 20MOQ: 50 Kilograms
-
Kovar Alloy F15US$ 25 - 30MOQ: 100 Kilograms
-
Kovar ASTM F-15US$ 25 - 30MOQ: 100 Kilograms
-
Invar (INVAR 36)US$ 15 - 20MOQ: 50 Kilograms
-
Invar 36, Low Expansion AlloyUS$ 15 - 20MOQ: 50 Kilograms
-
Invar 36, Low Expansion AlloyUS$ 15 - 20MOQ: 50 Kilograms
-
Super Invar 32-5US$ 20 - 25MOQ: 50 Kilograms
-
Kovar Material Manufacturer and SupplierUS$ 25 - 30MOQ: 100 Kilograms
-
Invar 36 Manufacturer and SupplierUS$ 15 - 20MOQ: 50 Kilograms
-
Alloy 42 Manufacturer and SupplierUS$ 25 - 30MOQ: 100 Kilograms