Contact Platform Support
Help CenterCTI-A Muti-function Crane Performance Tester
Related Products
-
GDC-1 Crane Girder Deflection & Camber TesterUS$ 5555 - 55554MOQ: 1 Unit -
CHASE Friction Testing MachineUS$ 40000 - 80000MOQ: 1 Piece
-
Dynamic Fatigue Testing MachineUS$ 40000 - 80000MOQ: 1 Piece
-
Elevator Overspeed Governor Testing ToolUS$ 1 - 4000MOQ: 1 Piece
-
Elevator Overspeed Governor Tester(OGT-2)US$ 1 - 4000MOQ: 1 Piece
Description
It is used for the measurement of the brake slip of crane hoisting mechanism; deflection, resilience, camber, dynamic stiffness of the crane girder; the speed and acceleration of crane and crab/trolley; Crane hydraulic cylinder inspection.
It can also be used to measure the travelling speed and braking distance of other large equipment moving parts, as well as testing deformation of large-sized objects.
Functions
l The entire system requires only one digital control terminal to complete all operations.
l All the measurement items are transmitted through Bluetooth or wire.
l The test results are directly displayed on the digital terminal.
l Intelligent curve analysis allows manual comparison of measurement results.
l The system can save unlimited sets of test data over the years.
l Intelligent analysis of possible risks of crane operation through changes in data.
l The brake slip can be measured at any angle below the crane, which fully guarantees the safety of operators and measuring instruments.
l No need to install the target and mark on the measured object to complete the deflection measurement.
l The instrument adopts telephoto imaging system, which can observe the measured target from a long distance.
l Speed measurement function: it can measure the lifting speed of the crane lifting mechanism.
l No wiring on site, no crane control circuit required, greatly reducing the difficulty and intensity of work and increasing safety.
l Linear motion speed measurement.
l Measurement information is automatically collected by the instrument, no manual input required.
l The instrument uses a high-precision absolute encoder to ensure measurement at any angle without affecting the accuracy of the measurement.
l The instrument uses a high-precision, high-frequency rangefinder to ensure the accuracy and real-time of the ranging data.
l Adopt dedicated intelligent digital terminal for data collection and data processing, friendly user interface and simple operation
l The host is composed of a ranging sensor and a theodolite installed on the base.
Parameters
l Battery: DC 12V Built-in lithium battery
l Angular accuracy: 2”
l Liquid-electric compensation accuracy: 1s
l Liquid-electric compensation range: ±4ˊ
l Angle measuring mode: Absolute encoding.
l Ranging deviation: 0.5-20m
l Ranging: 0.5-500m
l Frequency: 25Hz
l Telescope magnification: 30X
l Objective aperture: 45mm
l Tube length: 157mm
l Plate level: 30”/2mm
l Circular level: 8”/2mm
Slip
l Range: >100m
l Deviation: ≤2mm
Deflection
l Range: >100m
l Deviation: ≤ 0.5mm
Camber
l Range: >100m
l Deviation: ≤ 0.5mm
Speed
l Range: 0-200m/min
l Accuracy: ≤1%
Dynamic stiffness
l Range: 0.5-20Hz
l Resolution: ≤0.1Hz
l Resolution: 0.01Hz
l Maximum single measurement time: 60s
l Wireless transmission distance: 0-500m (Open space)
Hydraulic cylinder
l Range：0-13.7mm
l Resolution：≤0.01mm
l Resolution：0.01mm
Acceleration:
l Range: ±2g
l Accuracy: ≤2%
l Resolution: 1mg
Configuration
Tester 1pcs, Intelligence digital control terminal, Range target 1pcs, charger 2pcs,cable 1pcs
Optional
Acceleration collector 1set,
Dynamic collector 1set,
Hydraulic cylinder Resilience module 1set
Send Inquiry to This Supplier
You May Also Like
-
Elevator Overspeed Governor Tester(OGT-3)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Acceleration Tester(Ride Q-1)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Acceleration Tester(Ride Q-2)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Acceleration Tester(Ride Q-3)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Gauge And Coplanarity Laser Detector(GCT-1)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Balance Coefficient Tester(LBC-1)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Balance Coefficient Tester(LBC-2)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Door Impact Tester(DIT-1)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Door Deformation Tester(DDT-1)US$ 1 - 4000MOQ: 1 Piece
-
Elevator Governor Calibration Table(OGTB-1)US$ 1 - 4000MOQ: 1 Piece
