American standard ASTM E595-15 Outgassing test

ASTM E595-15 Outgassing test - Test Requirement 

CVCM （collected volatile condensable materials）≤0.1%

TML （total mass loss）≤1%

WVR （the amount of water vapor regained）

ASTM E595-15 Outgassing test  - Test Conditions 

Pre Condition: 73 F/ 50% RH (24Hours)  ; Post Condition: 73 F/ 50% RH (24Hours)

This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125°C at less than 7*10−3 Pa  for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25°C.

ASTM E595-15 Outgassing test – Brief 

Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings,

adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the “as-received” condition or prepared for test by various curing specifications.

More about Outgassing test ASTM E595,please contact us : 

CASfire Technical Co.,Ltd

8F Building 4, Chinese Academy of Science, 

No.255 South Duiying Road,Jimei, Xiamen 361021, China

Tel: (+86) 0592-3500085 

MP: (+86) 18906059211  

Email: info@casfire.cn

Website: