Contact Platform Support
Help CenterIEC60695-2-2 Needle Flame Test Machine
Related Products
-
BS En ISO 15025 Protective Clothing Flame Spread Test MachineNegotiableMOQ: 1 Set -
Burning Behaviour of Bunched Cables (FTech-IEC60332-3)NegotiableMOQ: 1 Set
-
Nbs Smoke Density Chamber, ASTM E662, ISO 5659NegotiableMOQ: 1 Set
-
Testech Burning Behaviour of Bunched Cables Tester, En 50399NegotiableMOQ: 1 Set
-
Water Spray Test Apparatus (Resistance to Fire With Water) , BS 6387-D3NegotiableMOQ: 1 Set
Introduction
TESTECH Needle Flame Tester is in accordance with standards IEC60695-2-2 and IEC60695-11-5 to design and produce .The tester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials , plastic or other solid combustible materials industry to carry on small-flaming ignition experiments.
Needle flame tester uses standard size (Φ0.9mm) needle burner .and burns the sample with specific gas (butane) at the angle of 45 °.we determine the ignition risk of the small-flame caused by fault conditions in the equipment by testing the sample burning situation ,burning time and burning length
Model:FTech - IEC60695
Standard:
Comply with the relevant standards IEC60695-2-2 IEC60695-11-5 etc.
Technical Parameters:
1. Needle burner is made of stainless steel:the hole dia. 0.5mm ± 0.1mm, diameter≤0.9mm, length≥35mm
2. Burner flame angle:0- 45 ° (arbitrary adjustment)
3. The combustion gases: 95% butane gas or propane gas;
4.Subplate: white pine plank ( 10mm),
Surface covered by standard silk paper
200mm ± 5mm below the flame
5. Temperature range: 0--1000 ºC
6. The flame temperature requirements: 100 ± 2 ºC ~ 700 ºC ± 3 ºC,
Heating rise time: 23.5 ± 1.0s;
7. The flame height: 12mm ± 1mm;
8. Ignition time: 0s ~ 999.9s adjustable, generally 30s;
9. Burning time: 0s ~ 999.9s, automatic recording, manual pause;
10. Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);
11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm)
12. Automatic test program , independent exhausting system;
13. Dimensions: L1120 * W520 * H1250mm,
The diameter of exhaust :Φ100mm;
14. Test power supply: 220V / AC, 50Hz
Send Inquiry to This Supplier
You May Also Like
-
Cone Calorimeter Heat Release Test Machine, ISO 5660NegotiableMOQ: 1 Set
-
Protective Clothing Contact Heat Transmission Test Machine, ISO12127-2007NegotiableMOQ: 1 Set
-
Big Combustion Chamber, DIN 54837 (FTech-DIN54837)NegotiableMOQ: 1 Set
-
Room Corner Test Machine, ISO 9705, En 14390NegotiableMOQ: 1 Set
-
Motor Accessories Combustion Testing Machine, Fmvss 302NegotiableMOQ: 1 Set
-
Full Face Masks Resistance to Thermal Radiation Test Machine, En 136NegotiableMOQ: 1 Set
-
Thermal Protective Performance Tester (FTech-ISO17492)NegotiableMOQ: 1 Set
-
Textiles Flame Propagation Tester, Nfpa 701 Test Method 2NegotiableMOQ: 1 Set
-
The Minimum Ignition Temperature Testing Machine, IEC 61241NegotiableMOQ: 1 Set
-
Fabric Vertical Flame Spread Test Machine, ISO 6941NegotiableMOQ: 1 Set
