Home > Products > Pneumatic fender > Yokohama type ship pneumatic fender for bunkering service
Yokohama type ship pneumatic fender for bunkering service
- 500 Piece / Pieces per Month
- Qingdao Port
- T/T L/C
- ISO17357 Yokohama Type Pneumatic Marine Rubber Fender for ship to quay
- Marine large yokohama type pneumatic rubber fender for STS
- 1.5m*3.0m marine mooring yokohama type fender for sale
- Floating dock pneumatic fender for port berthing
- Floating oil tanker pneumatic rubber fender
- Inflatable boat pneumatic fender for berthing
Product Details
Brand Name: | FLORESCENCE | Place of Origin: | China | Model Number: | FL-2.03.5 |
Part: | Other, Boat floating pneumatic fender with aircraft tyres |
Product Description
Floating pneumatic fenders have been in use for around 50 years.It is the leading anti-collision device for marine application in the world. The compressed air filled rubber fender is used as a protective medium for ship-to-ship, ship to quay and ship-to -berthing.
Floating pneumatic fenders can be delivered in various sizes and types. Chain and tyre net(CTN) type is usually recommend to protect the fender body, but sling type or body only is also available.
Florescence brand Pneumatic Rubber Fender are exported to many countries like Vietnam, America, Denmark, Finland, Indonesia, Singapore, Philippines, France and more. High product quality and reasonable costing drives their adoption in the global market and are increasingly preferred as the most popular replacement to Yokohama fenders.
Structure of floating pneumatic fender
Floating pneumatic fender consists of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized together firmly.
1. The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2. The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3. The inner rubber layer seals the pressurized air inside the fender.
4. Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
3 Lower mooring forces
4 Adaptable to the tide
5 Low maintenance cost
6 Low reaction force and hull pressure
7 Most cost competitive system
8 Simple and low cosy installation
9 Various optional fitting
10 Advange against shearing force
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Test of ship dock pneumatic fender for boat berthing
The material test of the outer rubber and the inner rubber shall be conducted in accordance with the physical properties of inner and outer rubber required by ISO 17357:2002
2.Dimensional inspection
The dimension of all the fenders shall be inspected at the initial internal pressure and the results shall be within the following tolerances:
- length: +10%, -5%;
-diameter: +10%,-5%
3.Air-leakage test
The air-leakage test shall be conducted on all the fenders at initial pressure for more than 30 min, and the test results shall confirm that there is no air leakage.
4.Hydrostatic-pressure test
The hydrostatic-pressure test shall be performed for 10 min at the hydrostatic-pressure shown in "test pressure at 0% deflection". Maximum temporary elongation: 10%.
Pneumatic fender project case
1.Pneumatic Fenders Use For STS Operation In Russia
Qingdao Florescence 15pcs Dia3.3m L6.5m pneumatic fenders used for oil tanker in Russia since 2017. Pneumatic fenders worked well and played a great role during STS operation.
2.Pneumatic Fenders Use For Dock In Lithuania
Qingdao Florescence recommends Dia2.5m L3.5m pneumatic fenders based on customer's ship and dock information. Customer used pneumatic fenders for ship to dock service in 2018 and used for ship to ship operation in 2019.
3.Dia1.5m L3.0m pneumatic fenders use in Mexico
Dia1.5m L3.0m pneumatic fenders were used for ship to ship service in Mexico. And will use for dock during ship berthing. Fenders are commonly fitted with a chain-tyre net for added protection. They were developed in order to extend the range of usage of pneumatic fenders and enable them to be used for docks.
Contact Us
- Qingdao Florescence Rubber Products Co.,Ltd
Pneumatic fender | Airbag | foam filled fender | Rubber fender |
Oil boom |
- BV Certificated Pneumatic Rubber Fender For Dock
- Pneumatic floating rubber fender
- Marine ship lifting land moving airbag
- Boat marine airbag for docking
- Ship docking launching airbag with free fittings
- Marine barge rubber pontoon launching airbag
- Inflatable marine rubber ship launching moving airbag
- BV Certificated Floating Ship Marine Rubber Fender
- Dock barge pneumatic fender for marine operation
- RS certificated marine pneumatic fender with aircraft tyres
- Ship to berthing pneumatic rubber fender
- BV certificated pneumatic fender to Greece
- RS certificated Dia1.0m L2.0m yokohama type marine fender
- Pneumatic fender for ship to ship service to Malaysia
- Dia2.5m L5.5m oil tanker barge use berthing pneumatic fender
- Big size Dia3.3m L6.5m pneumatic floating fender to India
- Fishing boat yacht use gray foam filled fender
- EVA polyurethane foam fender marine buoy
Popular Searches
Find Similar Products By Category
- Transportation > Marine Supplies > Other Marine Supplies
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-