Rubber Compounding And Mixing Machine

Application:  

 CFine's Dispersion kneaders are used widely for the following applications:

   1）Plastic Compounds & End Products

        HDPE, LDPE, PP, PVC, ABS, PS, EVA Thermoplastics compounds & profiles wire covering, BMC, etc.

   2）Rubber Compounds & End Products

        Natural Rubber, Synthetic Rubber Mastication of NR, IIR, SBR, CR, EPDM, Fluorine Rubber, Silicone Rubber. Rubber Tires, Packing Gaskets, Hose Belts, Shoe Sole, Sponge, Electric Wire Covering, Casters, Golf Balls, Oil Seal, Weather Strips, Water Proof Sheet, EVA, Thread Compound Battery Containers, tubes, Conveyor belts, etc.

Equipment advantages

(1)  It only takes approx 10-15 minutes for every batch. Also, you can shorten or lengthen the mixing time to get a better dispersing result. Compared to the previous processing methods, it is more efficient.

(2) The inner surface of the mixing chamber and pressing ram are sprayed with hard chrome;

  After surface treatment, the equipment has sufficient hardness to process different materials.  The service life of the equipment is improved. 

(3)  Heated and cooled by an electrical bar and water channel in the sidewall of the mixing chamber.

  The temperature probe is at the bottom of the mixing chamber, and the temperature of the material is accurately measured. Temperature Heating and cooling are faster than conventional equipment.

(4)  The speed of the rotors is adjustable.  Avoid powder flying in the early stage. 

(5) The anti-leakage device adopts the mechanical shaft seal pressing technology and adopts a self-lubricating sealing ring seal so that the sealing ring is always in compression and sealing state during the mixing process.No leakage of powder when it is working.

Specifications：