Contact Platform Support
Help CenterCountersunk Hole Pot Magnet of NdFeB
Related Products
-
Axial Hole Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton -
External Threaded Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Internal Threaded Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Hook Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Internal Threaded Rubber Coated Pot MagnetUS$ 1 - 111MOQ: 1 Short Ton
Countersunk Hole Pot Magnet of NdFeB
Countersunk cup magnet
Countersunk holding magnet
Countersunk round base magnet
Horizon have been producing and supplying the pot magnet. The pot magnet is also called cup magnet, holding magnet, round base magnet, mounting magnet, flat pot magnet, etc. The pot magnet consists of a cylindrical or ring NdFeB (Neodymium-iron-boron) magnet assembled with a concentric non magnetic ring into a steel pot. The magnet is magnetized together with the pot to create a holding force that is significantly stronger than an individual magnet, because this pot structure directs and concentrates the flux from both magnetic poles to one active face.
The pot magnet will retain its magnet force permanently unless working temperature or external magnetic field increases. The size, shape and magnet material of the pot magnet can adjust to its usage requirements including pull strength, working temperature, etc.
The pot magnet is versatile so that it is appropriate for various industrial applications. The typical applications are fixture positioning, sign and banner holders, emergency light holders, tool bases, etc.
When considering your selection, please be aware of the following factors: The stated force (holding/gripping) is based on the pot magnet retaining force against a direct pull when offered to a clean ground mild steel surface with a minimum thickness of 6mm. The smallest gap, even paint or un-ground surface will reduce the holding force significantly. On a vertical surface the holding force is reduced by approximately 70%.
Advantages over Competitors:
Quality First: genuine Neodymium magnet, magnet size NEVER smaller than requirement
More sizes available to save tooling cost
Standard sizes in stock and available for immediately delivery
Custom-made solutions available upon request
Technical Data:
Part Number |
D |
d1 |
d2 |
H |
Force |
Net Weight |
Maximum Operating Temperature |
HM-A16 |
16 |
3.5 |
6.5 |
5.0 |
6 |
5.5 |
80 |
HM-A20 |
20 |
4.5 |
8.5 |
7.0 |
11 |
12 |
80 |
HM-A25 |
25 |
5.5 |
10.5 |
8.0 |
20 |
21 |
80 |
HM-A32 |
32 |
5.5 |
10.5 |
8.0 |
32 |
37 |
80 |
HM-A36 |
36 |
6.5 |
12.0 |
8.0 |
42 |
45 |
80 |
HM-A42 |
42 |
6.5 |
12.0 |
9.0 |
66 |
72 |
80 |
HM-A48 |
48 |
8.5 |
16.0 |
11.5 |
80 |
125 |
80 |
HM-A60 |
60 |
8.5 |
16.0 |
15.0 |
112 |
250 |
80 |
HM-A75 |
75 |
10.5 |
19.0 |
18.0 |
162 |
465 |
80 |
More information please view here.
Send Inquiry to This Supplier
You May Also Like
-
External Threaded Rubber Coated Pot MagnetUS$ 1 - 111MOQ: 1 Short Ton
-
SmCo MagnetUS$ 1 - 111MOQ: 1 Short Ton
-
Countersunk Hole Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Axial Hole Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
External Threaded Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Internal Threaded Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Hook Pot Magnet of NdFeBUS$ 1 - 111MOQ: 1 Short Ton
-
Square Block Neodymium MagnetUS$ 1 - 111MOQ: 1 Short Ton
-
Ring Neodymium Magnet FactoryUS$ 1 - 111MOQ: 1 Short Ton
-
Arc Shaped Neodymium MagnetUS$ 1 - 111MOQ: 1 Short Ton
