Portable Body Massager Provide You With Guarantees Portable Body Massager

Urban white-collar workers work for a long time in the office, people's spirit is focused on work, a few hours of work time such as physical fatigue is no less than manual work, in this case, massage with a massager is undoubtedly the ideal way to relax.

But the current massage market is no longer the red sea of competition, but the dead sea of mixed fish and dragons. To make a joke, massage is no longer sold as a standard 3C product, maybe according to the weight of massage, which is a tragic real joke. As a result of a large number of "jerry-built, second-best, rough-made" massagers flooded the market.

Nowadays, many massagers are directly plugged in. For human body, the voltage below 36V is the safe voltage for human body. In terms of domestic standards, safety certification must be provided for products. According to the compulsory national standards, CCC certification is required. Massage adapters usually pass 3C certification. The length of power supply wire of massager connected with electricity is not less than 1.83 meters. In order to prevent electric shock, many massagers are made of plastic and sponge, which must be over-heated and over-current protected to avoid product overload and spontaneous combustion leading to fire safety. The massager has heating function, so the spare parts must be protected to avoid burning people with fever. Dangerous, massage products plastic shell strength is not enough, not resistant to shock stress rupture will also be exposed to electric shock danger, massage external radiation and interference, will also be dangerous to the human body and equipment. Relatively speaking, there is a layer of safety guarantee for the human body with safety certification. Qirui massager requires every product to have a test report and safety certification. Even if there is safety certification, Qirui company requires employees to take safety responsibility as a habit. The massager must be aged for more than 200 hours to maintain product function. Complete, in the environment of high temperature 60C +2C -20C +2C, cyclic testing for 24 hours, to ensure the normal operation of the product, without affecting the appearance, normal function. There should be no foreign body inside the product that can cause fire, electric shock danger and mechanical abnormality. The power adapter must pass 3000V short-term high voltage withstand voltage safety test, no abnormality before it can leave the factory.

Core advantages

1）We export to 23 countries and regions

2）Special product can be order with one pcs.

3）adhere to the use of environmentally friendly energy-saving materials

4）Quality Supervision Institution Testing and Certification Guarantees Safety

5）6 years insisting on the production of quality

6）85% of the business comes from the referral of old customers

7）2535 customers serving no quality complaints for 5 consecutive years

8）management systems certificated by Medical Device Quality Management System. We can trace down to the responsible persons even for the tiniest details

Fu An Qi Rui massager features:

1.we only want to serve the distinguished 20% of the market share

Only serve for the 20% esteemed customers

2.95 % of the customers order on payment never meet with us

3.Qirui is not a small workshop. We have a 500 square meters office

4.5 years senior membership of Alibaba Gold Supplier of domestic trade which is featured with price transparency no hidden costs

5.We are a enterprise that participates in charitable and voluntary activities to give back to the society and fulfill our social responsibility

6.Self-owned R&D team, more than half of the R&D staff have been working on R&D for more than 10 years

7.Adopting the only intelligent automatic CNC machining center in Fu'an, the whole production line has almost no manual labor

Technical performance

1.The use of high-precision, high-hardness synchronous gear, imported DuPont POM achieving level 5 of material accuracy, the tooth surface is more wear-resistant, thus improving the life of the massager, but also effectively reduce the noise

2.Low vibration: Although the rotor has been precision machined, it has become in equilibrium. However, it is still balanced by high-precision dynamic balancing equipment. Therefore, the motor running vibration is very small.

3.Stable performance: key parts such as motor rotor and shaft are equipped with advanced CNC machining equipment to improve the interchangeability of parts.

4.Magnetic tile and carbon brush high efficiency, so the performance is stable, the motor uses double high material high-performance magnetic tile and high-quality carbon brush is more wear-resistant and non-magnetic loss, high efficiency, stable performance, and increased service life.

5.The transmission is stable and the bearing capacity is high: the worm teeth mesh with the worm gear teeth continuously, and there is no process of entering and exiting the meshing, so the work is stable, avoiding the pulsating noise, shock and vibration that instantaneously burst at the time of starting.

6.High safety, low noise, low temperature rise, built-in surge protector, motor rotor is made of high quality silicon steel sheet with copper material, temperature rise under normal load is less than 60K (ambient temperature 25°c), this series adopts high precision Low noise Z4 bearings further reduce noise and losses.

7.which are different from competitors' manufacturing processes. 23 heavy-duty inspections, all massager products including accessories, have achieved standardized design and production. Each product will undergo 20 minutes of silent testing and 40 minutes of performance testing before leaving the factory.

8.Use PTC ceramic heating components consume small power, controllable temperature, fast heating, instantaneous current surge protection, power consumption per hour only ¥0.02

9.The shell of the massager is made with imported original ABS, which is never doped with black material of secondary material. It has high toughness, impact resistance, higher strength and environmental protection. Its raw materials and manufacturing quality are more reliable and synchronized with top-level brands at home and abroad.

10.Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and high temperature resistant is good and safe。

11.Over 50,000 times of bionic resistance flexing test, green and environmentally friendly low-carbon formaldehyde-free skin-friendly leather, strictly in accordance with the "one inch and seven needles" international standard, hand-sewn, the length of the stitching is controlled at 0.4cm, and the error is less than 0.25mm. European and American standards will save your cost at least 30%。

12.U.S. DuPont POM Synchronous Gear Massage Head.

13.High temperature 60C°±2C°, low temperature -20C°±2C°, high and low temperature weather resistance recycling test, no cracking, no abnormality, ensuring stable quality.

Rui Rui insists on using environmentally friendly energy-saving materials

Tired to use the Rui Rui massager

Qirui massager for backache

E-mail：qiruigm@gmail.com

WhatsApp:13850385558

Facebook:13850385558