Top rated foot massager Prices of raw materials have risen but Qirui has not top rated foot massager

Low noise and high temperature resistance grade: Seamless steel tube is used in motor housing, EMC anti-interference is built in, QZ-2/130 H grade insulated high temperature pure copper wire, so low noise, high temperature resistance grade is safer and safer.

Today, let's talk about why seamless steel tube is used in motor shell. The motor shell is divided into seamless steel tube shell and sheet coil shell, which directly affects the cooperation and the use effect of the motor. The seamless steel tube case is integrally formed, and the iron sheet coil case is joined together by the iron sheet. In use, the seamless steel tube case motor has better heating, vibration, voice, energy saving and ultimate service life than the iron sheet coil case motor. Of course, the price is higher, so-called "one cent for one thing".

With the continuous improvement of living standards, the number and types of household electrical appliances and electronic devices are increasing, and the electromagnetic disturbance among electrical appliances is becoming more and more complex. Such a harsh electromagnetic environment will also have a negative impact on people's living environment. In order to run in the electromagnetic environment and not produce unbearable electromagnetic interference ability to any equipment in its environment and not to be disturbed by other electronic devices, Qirui massager installed EMC anti-interference in the motor, which effectively avoided the impact and harm to consumers'daily cultural life and even personal safety.

In order to survive the price war between massage enterprises, various ways to reduce costs are ubiquitous in the industry, such as power adapter, machine core, motor, leather case, sponge and so on. Moreover, even if the same motor, different regions, different materials, different manufacturers prices are also very different. But these are confused and difficult to distinguish among consumers. The motor can not be changed on the outer shell. Many massager enterprises work hard on high-cost copper wires. The market has bred copper-clad aluminium and aluminium wires and other motors. Even copper wires of pure copper wire motors have the size of wire diameter, toughness, hardness and even non-standard copper wires. It is not enough to talk about insulation and high temperature resistance. Grade one. In this case, Qirui Massage Company has been using built-in EMC anti-interference, QZ-2/130 degree H insulated seamless steel pipe motor with high temperature resistant pure copper wire, insulated copper wire withstands high temperature 130C degree, which effectively reduces noise and improves the temperature resistant grade to make product quality safer.

Core advantages

1）We export to 23 countries and regions

2）Special product can be order with one pcs.

3）adhere to the use of environmentally friendly energy-saving materials

4）Quality Supervision Institution Testing and Certification Guarantees Safety

5）6 years insisting on the production of quality

6）85% of the business comes from the referral of old customers

7）2535 customers serving no quality complaints for 5 consecutive years

8）management systems certificated by Medical Device Quality Management System. We can trace down to the responsible persons even for the tiniest details

Fu An Qi Rui massager features:

1.we only want to serve the distinguished 20% of the market share

Only serve for the 20% esteemed customers

2.95 % of the customers order on payment never meet with us

3.Qirui is not a small workshop. We have a 500 square meters office

4.5 years senior membership of Alibaba Gold Supplier of domestic trade which is featured with price transparency no hidden costs

5.We are a enterprise that participates in charitable and voluntary activities to give back to the society and fulfill our social responsibility

6.Self-owned R&D team, more than half of the R&D staff have been working on R&D for more than 10 years

7.Adopting the only intelligent automatic CNC machining center in Fu'an, the whole production line has almost no manual labor

Technical performance

1.The use of high-precision, high-hardness synchronous gear, imported DuPont POM achieving level 5 of material accuracy, the tooth surface is more wear-resistant, thus improving the life of the massager, but also effectively reduce the noise

2.Low vibration: Although the rotor has been precision machined, it has become in equilibrium. However, it is still balanced by high-precision dynamic balancing equipment. Therefore, the motor running vibration is very small.

3.Stable performance: key parts such as motor rotor and shaft are equipped with advanced CNC machining equipment to improve the interchangeability of parts.

4.Magnetic tile and carbon brush high efficiency, so the performance is stable, the motor uses double high material high-performance magnetic tile and high-quality carbon brush is more wear-resistant and non-magnetic loss, high efficiency, stable performance, and increased service life.

5.The transmission is stable and the bearing capacity is high: the worm teeth mesh with the worm gear teeth continuously, and there is no process of entering and exiting the meshing, so the work is stable, avoiding the pulsating noise, shock and vibration that instantaneously burst at the time of starting.

6.High safety, low noise, low temperature rise, built-in surge protector, motor rotor is made of high quality silicon steel sheet with copper material, temperature rise under normal load is less than 60K (ambient temperature 25°c), this series adopts high precision Low noise Z4 bearings further reduce noise and losses.

7.which are different from competitors' manufacturing processes. 23 heavy-duty inspections, all massager products including accessories, have achieved standardized design and production. Each product will undergo 20 minutes of silent testing and 40 minutes of performance testing before leaving the factory.

8.Use PTC ceramic heating components consume small power, controllable temperature, fast heating, instantaneous current surge protection, power consumption per hour only ¥0.02

9.The shell of the massager is made with imported original ABS, which is never doped with black material of secondary material. It has high toughness, impact resistance, higher strength and environmental protection. Its raw materials and manufacturing quality are more reliable and synchronized with top-level brands at home and abroad.

10.Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and high temperature resistant is good and safe。

11.Over 50,000 times of bionic resistance flexing test, green and environmentally friendly low-carbon formaldehyde-free skin-friendly leather, strictly in accordance with the "one inch and seven needles" international standard, hand-sewn, the length of the stitching is controlled at 0.4cm, and the error is less than 0.25mm. European and American standards will save your cost at least 30%。

12.U.S. DuPont POM Synchronous Gear Massage Head.

13.High temperature 60C°±2C°, low temperature -20C°±2C°, high and low temperature weather resistance recycling test, no cracking, no abnormality, ensuring stable quality.

Rui Rui insists on using environmentally friendly energy-saving materials

Tired to use the Rui Rui massager

Qirui massager for backache

E-mail：qiruigm@gmail.com

WhatsApp:13850385558

Facebook:13850385558