Home > Electrical & Electronics > Passive Components > Capacitor > Two StageTension Coil Winder Tensioner For Fine Wire Ф0.08-Ф0.40mm

Two StageTension Coil Winder Tensioner For Fine Wire Ф0.08-Ф0.40mm

Two StageTension Coil Winder Tensioner For Fine Wire Ф0.08-Ф0.40mm photo-1
Two StageTension Coil Winder Tensioner For Fine Wire Ф0.08-Ф0.40mm photo-2
US$ 120 - 180 MOQ: 1 Piece
Key Specifications
Get Latest Price
Brand Name:
Pumila
Place of Origin:
China
Model Number:
MTQ
Payment & Shipping
Payment Methods:
Port of Shipment:
shenzhen
Delivery Detail:
7 days
Brand Name Pumila
Place of Origin China
Model Number MTQ
High speed and good quality coil winding magnetic wire tensioner MTQ series
Model Applied wire diamiter(mm) Tension scope(g)
MTQ-30 φ0.02-φ0.06 3-30
MTQ-100 φ0.04-φ0.12 10-100
MTQ-200 φ0.06-φ0.16 20-200
MTQ-400 φ0.08-φ0.25 50-400
MTQ-600 φ0.12φ-0.35 80-600
MTQ-800 φ0.14-φ0.40 100-800
MTQ-1200 φ0.20-φ0.50 200-1200



Product feature

1.Please read the product instruction carefully before using.
2.Working pressure: 5kg/cm2

3.If not use for a long time, when the damping wheel jitter, before starting please turn to the degaussing process: first close wise and then counterclockwise to adjust tension from maximum to minimum to complete the degaussing.
4.When debugging, first adjust the tension to the scale position, and then adjust the Anti-back tension adjustment knob to make the tension rod under the green logo (slightly lower than level state)

5.The reason for the tesion:
1) The wool pre-tension is not enough which need adjusted.
2) The O-ring and the wool felt is dirty, need to be cleaned or replaced.

6.During normal working, the tension can be adjusted from small to large (clockwise). But from large to small (conterclosewise) is prohibited. Otherwise may cause breakage.

When replace wool felt please follow the original thickness and size, otherwise will lead to the unsmooth of the wire winding.

Note:

1.Please reading the product instruction carefully before using;

2.If long time without using. When the damping wheel jitter, before starting please turning to degaussing process first clockwise and then counterclockwise tension adjuster to adjust the maximum to the minimum to complete the degaussing.

3.When debugging, first adjust the tension to the scale position, and then adjust the Anti-back tension, adjustment knob makes the tension rod under the green logo(slightly lower than the level state)

4.The reason for the tension can't adjust:
Hang line diagram
1)The wool pre-tighten is not enough need to be adjust it;
2)The O-Ring and the wool felt is too dirty need to be clean ot replace.

5.Normally working the tension can be adjusted from small to large (clockwise), prohibit the tension by major to small (counterclockwise), otherwise cause breakage.

6.When replace Wool felt please according to the thickness and size with the factory, or it will cause the wire not smoothly.


Product Picture

email:scarlett@pumilatech.com
mobile phone:86-17896495846





Product Tags: MTQ , Two StageTension Coil , Winder Tensioner

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Verified Business License
Business Type
Manufacturer
Year Established
2017
Annual Export Value
US$1 Million - US$1.5 Million
Port of Shipment
Shenzhen

Recommended Categories

Explore top categories and find suppliers for your specific needs