General White Floor Tile Adhesive Glue For Large Ceramic Tiles And Stone

General White Floor Tile Adhesive Glue For Large Ceramic Tiles And Stone

Introduction:

Tile Adhesive is a specially formulated cement-based adhesive for fixing ceramic floor and wall tiles on internal and external floors and walls.
Feature:

1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.

 

2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.

 

3. Has strong water retention, no need to dip tiles and wet walls, thin construction, easy operation, to reduce material consumption and building load.

 

4. Has good flexibility to resist effectively the destruction of various stresses.

 

5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.

 

6. It is no-toxic, no-radiation, no smell and environmental.

 

7. Has special formula to prevent the flow with too much southbound crash, easier construction.

Application:

It is used to fix porcelain tiles, marbles, natural granites, natural stones, travertine,pool tiles and pieces, and non-slip tiles of middle sized (up to 60x60cm size for the wall and any size for the floor).

Coverage:

1.Use 3*3mm notched trowel,approx.1.5-1.8kg/m2

2.Use 6*6mm notched trowel,approx.2.8-3.0kg/m2

(The above dosage are recommened for the even substrate)

Technical Date:

Surface drying time(Hr)		≤5
Cohesive strength	standard state (Mpa)	≥0.6
	Freeze-thaw cycle (Mpa)	≥0.4
Alkali resistance (48hr)		No change
Water resistance (96hr)		No change
Using level (kg/ m²)		1-1.5
color		White and grey