ALUCOONE Embossed Mirror Hairline Brush Brushed Emboss Polished Stainless Steel Composite Panel

Ever since invented and introduced one hundred years ago, improved and modified, stainless steel is famous for its modern trend with hi-tech feeling, had been widely apply for construction, transportation, navigation, aviation, military, and daily lives. In the end application, stainless sheet and coils application takes up 70% percentage. Whereas in constructional field, coils/sheet stainless steel covers 90% of end applications.  However, the ingredient of Cr and Ni in stainless steel is very expensive metal, which leads to the high raise pricing of stainless steel. And in practical application, we are not allowed to reduce the thickness of stainless steel coils or sheets so as not to decrease the mechanical property of application. The dilemma of cost and effect occurs to most applicators. Stainless Steel Composite Panel occurs to us at this right moment.

Alucoone is basically stainless steel composite panel with top and back skin 0.3-0.4mm thick stainless steel sheets, laminating to a mineral FR core in middle, overall thickness 4-6mm. The adhesion of metal and mineral is under help of macromolecule film at nanometer level, in addition to the help of Alucoone high-tech continuous lamination line, the composite structure turns out to be integrated and solid.

Three major advantage of  Stainless Steel Composite Panel are:

1) Attains great mechanical quality while reduce the cost greatly, 4mm composite stainless steel composite panel compete to 3mm solid stainless steel in this sense while the cost only half of which.

2) Stainless steel composite panel also attains Anti-crash quality with the help of mineral core layer especially during fabricating, installing or transporting. Last but least feature is in its major application-facade, the surface effect is much more smooth and in overall sense. Please revi

Stainless Steel Composite Panel is consisted of 2 stainless steel sheets bonding to a polytheylene core or FR core. Alucoone selects majorly #304, #316(or 316L) and #220M stainless steel coils as top and bottom skin materials.

#304 is a general purpose stainless steel, it stands 1000-1200 ℃ in temperature. It is also good at stainless and anti inter-crystally corrorsion.

#316 contents Mu element, which make the overall quality supeior to #304 stainless steel while also expensive. Under high temperature, environment sufric acid density between 15%-85%, #316 stainless steel can be widely applied especially in coastal locations.

#220 is newly ferrite stainless steel invented by NSSC, and it contents lowest possible element of Mo, while the corrision resistant quality is better than #316 stainless steel, it is the future of stainles steel materials