Hot sale plastic desiccant dehumidifier dryer for swimming pool

Why dehumidify?

An indoor swimming pool is  a wonderful leisure and exercise environment but evaportaion from the water surface poses real problems for the builing structure.Prolonged exposure to high humidity causes walls,decorative rapidly.Care must be taken to use correct materials and technique for the building and Macon dehumidifier will remove the humidity  from air.Keep humidity in range of 50%-65%,more comfortable.

◊More energy saving

How does it work?

The process of dehumidification involves moisture-laden air being drawn into a dhumidifier where the air passes across a refrigerated coil. The air is rapidly cooled below its dew point, condensing the water vapour and recovering its latent heat energy for re-use. The cooled air is then passed across the condenser where it is reheated and returned to served are at the required lower relative humidity.

Parameter

Advantage

• Easy installation

Dehumidifier can be installed by floor standing or wall mounted

• Intelligent control

Remote controller is standard and wire controller is optional.Remore controller can command unit in 10 meter.

• High quality case cabient

Surface of unit and screws are an-corrosion and not easy to go rust

• Quiet running

Use low noise,rotary compressor and low noise fan,ensure quiet ru nning.

• Stainless steel fan motor

Stainless steel fan motor bearing avoid corrosion caused by the high humidity.

• High quality fileter

With filter in grill,dust and impurity will be filter from the air.

• Auto swing

Air outlet grill direction can swing to 60°C

• Multi-protection

Unit design with compressor protection,high/low pressure and delay tomer protection,water flow protection.

• High efficient heat exchanger

0.1mm hydrophilic alumium foil heat exchanger prevent debrits from sticking to it and is 30% larger than usual size to keep its high efficiency.Use trapezoidal internal thread copper pipe improve its performance.

• 24 hours timing turn on/off

Unit can be set at any time to turn on/off during all day.

Components

Installation

Production

Contact us