Good quality swimming pool heat pump in anti UV ABS plastic case with heating and cooling function

Pool heat pumps work exactly the same way as your air conditioner or fridge, they extract the ambient temperature from the surrounding air, even in winter.

This heat is absorbed by the refrigerant gas, compressed and further heated,  Then rather than heating the air like an air conditioner, 

They heat the water via the Titanium Heat Exchanger Coil and return it to your pool.

The pipe installation can be done by yourself if you are handy, or your local plumber.

With 40mm High Pressure PVC pipe (class 12 - 50mm external) simply have your pool heat pump inlet and outlet connected to your pool filter system outlet and inlet, after your pool pump.Bypass valves as per diagram below are required to balance water flow through the pool heat pump for optimum performance.

Then have an electrician install a Suitable power supply on its own circuit with RCD and turn it on! 

ECONOMICAL AND QUIET TO RUN

Pool heat pumps are very efficient, converting the power used and returning five times or more the energy as heat.

This unit returns 11.2 KW  in heat output for only 2.0KW of electricity input.(The heat output will rise along with the outside temperature) 

Another way of looking at it is, for every $1 of power input you get $5-$6+ of heat!

This compares with resistance heaters, like your spa which may heat an element and return only 1kw of heat for every 1kw of electricity in,  or only $1 of heat for every $1 you spend.

Heat pumps are also considerably cheaper to run than electric or gas heating saving you up to 75%, Solar heating tubes on your roof require a lot of plumbing to install, need a pump to run, can be unsightly and NEED THE SUN!You can run your Macon Pool Heat Pump quietly and economically in the cold and without the sun!

They will work in temperatures from -15 degrees c to + 43 degrees c.This Macon Pool Heat Pump is also quiet at 58 DB(a) Just turn it on!