Stainless Steel Titanium Frit

Stainless Steel Titanium Frit Feature

1. Stainless steel titanium frit is made from stainless steel powder particle or titanium powder particle

2. Stainless steel titanium frit is sintered in a high temperature vacuum furnace. So stainless steel powder particle or titanium powder particle will not shed

3. Stainless steel titanium frit is a good filter media for surface filtration and depth filtration

4. Stainless steel titanium frit has narrow pore size distribution

5. High dirt holding capacity

6. Good porosity

7. High filter rating accuracy

8. The effect of filtration is good

9. High filter efficiency

10. Good permeability

11. Pressure loss is low in filtration process

12. High flow rate at low differential pressure

13. High compression strength

14. Good mechanical strength

15. Good abrasion resistance

16. Good durability against most liquids, gases and aggressive steam

17. High temperature resistance

18. High corrosion resistance

19. Backwash

20. Washable and Cleanable

21. Reusable

22. Long service life

23. Easy to be welded, fabricated

24. Easy to be cutted into different shapes, such as circular, sheet

Stainless Steel Titanium Frit Technical Data

Raw Material: SS 316L,Titanium

Filter Rating: 0.22-100 Microns

Operation Temperature: ≤ 816 ℃

Length: ≤ 800 mm

Width: ≤ 320 mm

Regular Size: 50 mm*50 mm,100 mm*100 mm,200 mm*200 mm,300mm*300 mm,800 mm* 320 mm or others

Special Size: 1000 mm*200 mm

Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others

Application

Sensor, inductor, detector, survey meter, pressure release device, polymer extrusion device, polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry