Contact Platform Support
Help CenterCNC Rebar Straightening & Cutting Machine 4-12mm Diameter Cutting Machine
Related Products
-
3-12mm High Quality Steel Bar Cutting Straightening Machine With Good PriceUS$ 550 - 750MOQ: 1 Set -
Cold Bending Machine for TunnelUS$ 4000 - 4800MOQ: 1 Piece
-
U-Shaped Steel Bracket Bending Machine for MiningUS$ 4000 - 4800MOQ: 1 Piece
-
CNC Hydraulic Pipe/Plate Bending Machine ManufacturerUS$ 4000 - 4800MOQ: 1 Piece
-
Hydraulic U Steel Platform Arc Bending Machine for Tunnel RailwayUS$ 4000 - 4800MOQ: 1 Piece
Description:
1, rack, trough should be installed straight, and should be aligned with the guide tube, straight tube and cut the center hole.
2, hand rotating flywheel, check the transmission and working equipment, adjust the gap, fastening bolts, the motor must be set to be followed by zero protection. Confirm the normal operation before.
3, Straightening bar diameter should be used, select the appropriate straightening block and transmission speed. Straightening block diameter should be larger than the diameter of steel 2-5MM, after commissioning, before feeding.
4, the straightening block is not fixed, the protective cover is not covered before wearing a reinforced bar. Do not open the protective cover and adjust the gap during operation. Do not wear gloves operation
5, when the rebar into the hand and the trolley should maintain a certain distance, shall not be close. Machinery is not allowed to shelve tools, objects, to avoid vibration falling into the body
6, should not cut straight before feeding the end of the guide tube should be installed before a 1M long steel pipe. Reinforcing steel should be first passed through the guide hole before straightening. Discs should be released to put the human body on the frame to be smooth, chaos silk or steel off the shelf, you must stop processing
7, after straightening the steel if there is a slow bend, you can increase the offset straight block until straightening up.
Parameter:
Straightening range: 3-12mm(diameter)
Straightening speed: 18-40m / min
Motor power: 3kw 4kw
Dimensions: 1080 × 400 × 600mm
Machine weight: 130kg
Send Inquiry to This Supplier
You May Also Like
-
Hydraulic Steel Profile Cold Bending Machine for H/I BeamUS$ 4000 - 4800MOQ: 1 Piece
-
Cold Bending Mahcine H/I Beam Steel BendingUS$ 4000 - 4800MOQ: 1 Piece
-
4mm-12mm Rebar Straightening and Cutting Machine, Steel Bar StraightenerUS$ 550 - 750MOQ: 1 Set
-
CNC Rebar Straightening & Cutting Machine 4-12mm Diameter Cutting MachineUS$ 550 - 750MOQ: 1 Set
-
4-12mm Scrap Rebar Straightening and Cutting MachineUS$ 550 - 750MOQ: 1 Set
-
High Quality 45# Carbon Steel Parallel Thread Rebar CouplersUS$ 0.26 - 0.85MOQ: 1000 Pieces
-
Standard Mechanical Steel Rebar CouplerUS$ 0.26 - 0.85MOQ: 1000 Pieces
-
Hand Push Gasoline Concrete Power Trowel MachineUS$ 280 - 780MOQ: 1 Set
-
5.5kw Hand Push Power Gasoline Trowel Concrete Floor Polishing MachineUS$ 280 - 780MOQ: 1 Set
-
Gasoline Concrete Power Trowel MachineUS$ 450 - 780MOQ: 1 Set
