JSF08 high precision short fiber morphology and mechanical property tester

JSF08 high precision short fiber morphology and mechanical property tester

Introduction

Conventional fiber strength measurement has a wide range of experimental instruments, however, for materials such as bamboo fiber, fineness, strength, short length, fragile and easily broken, such materials in the experiment of specimen preparation is big problem, also need corresponding to this special material experimental tensile device. The tension apparatus is developed under this background by special precision chucks are carried out on the specimen clamping, ensure the fiber extension in tensile process does not slip. The instrument optical measurement system through the surface morphology of the fibers were observed and filmed the fiber tensile process, and the bamboo fiber sample accurate positioning in the chuck through the vertical optical system.

Technical parameters :

1. The lens magnification level optical system: 24 pixel vertical/micron optical system: 0.7 ~ 4.5 X

2. The scope of the power and precision: 4.903 N and 4.903 mN, accuracy of one over ten thousand of the range.

3. Guide: Sweden SKF, precision linear ball guide rail, formation of 12.5 mm

4. Screw: Japan's central precision JCE, pitch of 0.25 mm

Step 5. Precision drive motors: ORIENTAL, each minimum 0.1125 degrees, single step the highest accuracy of computational physics 0.068 microns

6. The fiber separation: 0.8 mm

7. Using the special clamp for short fibers (such as bamboo short fiber), the measurement of tensile properties.

8. Fiber tensile speed, separation, and the maximum dynamic range is adjustable.

9. Through the two directions of digital optical system can be carried out on the sample local magnification and panoramic magnification