Factory Supplier threaded cw617n Brass Dynamic Balance Proportional Control Valve

Technical Data

Applicable in Heating and Cooling system (glycol or brine water), Drink Water system(Hot Water/ Cold
Water), Sea Water (Cold Water)
Function: Balancing, Set-advanced, Measure, Shut-off, Leakage(optional)
Valve Body, Valve Cover: Brass Connection: Screwed DIN2999 BS21
Connector Link: PP Valve Cone: Copper Alloy
Valve Shaft: Copper Alloy Pressure Measuring Port: Brass with EPDM seal
Manual Wheel PC
Max. Work Pressure: PN16
Fluid Error: ± 5% (50% - 100% opening)
Work Temperature: -20 °C ~ 120°C. Higher temperature setting could be ordered. When it it more than
120°C, please detach the manual wheel.
Seal: PTFE/ Double-sided O-ring.
Valve Body: DN (metric centner system) or Inch (english system)

Water Pressure Balancing Valve is used to balance water power in a system.

It specially used to measuring the change of flux of the channels.Refined Copper Valve and Soft Seal promise

the long life.Every measured point is self-sealed. When working, users chould take off the terminal-cap and

then insert the sensor through sealing. It is applicable in new system Valve. In the old system, pipe diameter is

us ually too large. When the valve is equal to the pipe,valve opening will be too small. Therefore, the new valve

which lower the Kv value, increase the valve opening, is more accuracy.

 Standard export packageor according to customers' requirments

BEIJING ZLRC Enviromental Protection Equipment Co., ltd mainly foucs on FRP products and FRP related machine manufacture and export.Our main products include  pipe production line, FRP tank production line,valves,water meters and other industrial hardware and so on.

(1) Ball Valve is not only own with the functions of opening quickly, easy to maintain, good sealing but also safety fire-safe and Antistatic designs. ZLRC manufactures designs various kinds of ball valves for one-piece, two-piece, three-piece, thread end, socket weld end, butt weld end, flange type, full port, reduce port. The selection of ball valve material includes stainless steel, carbon steel, and cast iron. The working pressure from 1000 psi to 6000 psi application of you chose. Designs of different sealing are as client’s requirement. Chose the suitable ball valve to use in piping system, ZLRC is the best supplier.

(2) Gate valve is to ensure a straight line flow of a liquid when valve is fully open. The gate valve is not apply to regulate flow . Gate Valve is not necessary to open frequently ,and it maintain the valve on position of wide open or closed.

(3) Globe valve is different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable plug and a ring seat in a generally spherical body. The flow direction from bottom to top is important when installing the valves.

(4) Needle valve is having a small seat ring and a pin-shaped, it allows precise regulation of flow rate. Needle valves are not only usually used in flow metering applications but used in low flow rate must be maintained for some time.

(5) Pressure reducing regulators automatically cuts off the flow of a liquid or gas at a certain pressure. Gas pressure regulators are used to regulate the gas pressure and are not appropriate for measuring flow rates. Pressure reducing regulators are used to usable pressure for various applications.