Self-lubrication Nylon Rod for Machinery Processing Wear High Temperature Nylon Rod

engineering plastic nylon rod

Introduction of the NYLON ROD :

MC nylon is the most widely used thermoplastic in the engineering world . It has good mechanical strength and resistance to abrasion . Material has strong impact resistance , Meant for use  in dry environment due to its ability to absorb water . Also good for use in wearing situations with bearings and gears etc.

Application fields of the NYLON ROD :

Wearparts , transmission parts , home appliance parts , automotive parts , wire rod to prevent the machine parts , chemical  machinery parts, chemical equipment , such as turbine , gear ,bearing , impeller , shaft , dashboard, drive shaft ,valve , blades , wire rod , high pressure washers , screws ,nuts , seals, shuttle bushing , connector , etc. 

Specifications of the NYLON ROD :

Advantges of the Nylon rod :

1. Good Tensile strength;
2. High impact and anti  impact strength;
3. High heat deflection temperature ,
4. High strength and hardness 
5. Good glide and soft home characters;
6. Good chemical stability against organic solvents and fuels;
7. Resistant to thermal aging (applicable temperature between -60°C and 190°C;
8. Size alternation by humidity absorption must be considered.

Contact Us