Flameless Explosion Venting

DESCRIPTION

BasCo Corporation designs simple, reliable explosion protection solutions to meet your safety

requirements. During normal venting, an explosion is freely discharged, allowing flames and

dust to exit the process vessel being protected. When the process vessel is located indoors,

ducts are generally used to safely convey the explosion outside the building. However the cost

of implementing such ducts and larger vents due to dramatically decreased venting efficiency

limits the practical use of ducts.BasCo flame arresters are designed to protect people and

equipment from flames and dust, releasing post-combustion gases only. In the event of an

explosion, flame and dust will discharge through the open vent into the FlamQuench II. The

dust is retained, and the flame from the explosion is extinguished as it travels through the

stainless steel mesh.

BasCo SERVICES

BasCo expertise creates the right explosion protection solution for your specific application:

• Engineers and application specialists familiar with your application and applicable codes

• Product testing and hazard analysis

• Vent relief area sizing software online at /www.xzbf@foxmail.com(NFPA/European standards)