AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

Application--medical grade stainless steel 316 316l

1.Automotive:Automotive trim and molding/Difficult-to-form exhaust-          system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-              system components, catalytic converter shells, clamps

2. Construction: Gutters and downspouts, roofing, siding

3. Kitchenware: Cooking utensils, dishwashers, ovens, range hoods, refrigerators, skewers

4. Chemical processing: Oil refinery equipment, oil burner and heater parts

5. Appliances: Hot water tanks, residential furnaces

6. Power generation: Heat Exchanger tubing

7. Farming: Dry fertilizer spreaders/Farm animal pens

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stockcturing

Stainless steel maintenance:

(1) Regular cleaning and maintenance

(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches

(3) Use soap, weak detergent or warm water to remove surface dust, dirt

(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)

(5) Use neutral detergent or ammonia solution in addition to surface oil

(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by dirt.

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

Product Details:

1. Carbon/Low Alloy High Strength/ Alooy Structure/ Boiler and Pressure Vessel steel plates

2 cold rolled steel plates

3 galvanized steel plate

4.Al-zinc Coils and Plates

5.Stainless Steel Sheet

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

Surface finishing

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

Structural Picture and Weight Counting Method

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

we can:uring

 Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.

      Open flat coils into steel plate. For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

other product supply

Tianjin Emerson Commercial and Trade Co.,Ltd mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Tianjin Emerson Commercial and Trade Co.,Ltd has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production.

Steel plate: hot rolled steel plate; cold rolled steel plate;galvanized steel plate; al-zinc steel coil plate; stainless steel plate

Steel pipe: seamless pipe; galvanized round pipe; stainless steel pipe

Round bar

Steel profile: angle bar; channel bar; h beam; rectangular tubes

Our Advantage:

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock

1. -What do you need to provide a quote?

- Please kindly send us the drawing of your product. Details below should be included, A.Materials B. Surface Finish C. Tolerance D. Quantity (Please be noted that these are essential for our quoting. We couldn’t quote the specific price without any of them.)

2. -How does the payment process work?

-Payment terms are flexible for us in accordance with specific conditions. Generally we advise 30%TT deposit, balance be paid before shipment.Or you can also pay in L/C at sight.

3. - How do I know about the production?

- We will double confirm your requirements and send you the sample before the mass production. During the mass production, we will keep you informed of any progress. Besides, we will do 100% quality inspection before shipment.

4. -How do I know about the delivery?

- We will inform you of the tracking number once we get it from shipping agent. Also we will keep updating the latest shipping information for you.

5. -What will you do for after sales?

- When our metal parts apply to your products, we will follow up and await your feedback. Any question related to our metal parts, our experienced engineers are ready to help.

6.- How long can make delivery?

-For stock products, will make shipments in 5- 7 days after receiving deposit or receiving L/C; for products need new production for common materials, usually make shipments in 15-20 days; for products need new production for special and rare materials, usually need 30-40 days to make shipment.

7.- Will the Test Certificate be certified to EN10204 3.1?

-For the new production products no need furthur cutting or processing, will provide the Original Mill Test Certificate certified to EN10204 3.1; for the stock products and the products need cutting or furthur processing, will issue Certificate of Quality on our Company, It will show the original mill name and the original datas.

8.- Once the received products found not comply with the products the contract demands, what will you do?

-Once the received products found not comply with the products the contract lists, when receiving the pictures and the official documents and data from your side, if it is proved not comply, we will compensate the loss at first time.

AISI Inox 2mm thickness sus 304 shim stainless steel sheet in stock