Rexroth A10VO, series 52, 53 of A10VO28,A10VO45,A10VO60,A10VO85 variable displacement axial piston pump

Standard export plywood case

Rexroth A10VO, series 52, 53 of A10VO28,A10VO45,A10VO60,A10VO85  variable displacement axial piston pump

1. Completely inerchangeable with original

2. The axial piston pump designed by swashplate is used in open loop hydraulic system 

3. The flow rate is proportional to the drive speed and displacement, and the flow can be adjusted continuously by adjusting the position of the swashplate.

4. Flange connections SAE-UNC or SAE metric

5. 2 drain ports
6. Allow high speed RPM
7. Good oil absorption performance
8. Low noise, short control time and long service life

9. High power / weight ratio
10. The driving shaft can bear axial and axial loads
11. Wide control range;
12. For multi loop system drive through shaft selection

13. Applicable for engineering machinery, maritime and boat and industrial machinery etc.
14. Continuous working pressure up to 250bar, the instantaneous maximum working pressure up to 315bar
15. Very competitive price

16. 1 year of warranty

17. Short delivery time

Note:The above values are valid when the absolute pressure of the suction port is 1bar, and if the flow rate decreases or the inlet pressure increases, the speed can be increased.